Follow Slashdot stories on Twitter

 



Forgot your password?
typodupeerror
×
Medicine Hardware

People Are Trying to Make DIY Ventilators To Meet Coronavirus Demand (vice.com) 98

As countries affected by the coronavirus pandemic expect to run out of ventilators and other equipment, makers are desperately trying to fill the gap with proposals for open-source, do-it-yourself devices. From a report: Most cases of COVID-19 -- the disease caused by the novel coronavirus -- do not require hospitalization. But for people hospitalized with severe infections, coronavirus damages their lungs and makes it hard to breathe in and circulate the amount of oxygen that their bodies need. Ventilators, machines that provide the lungs with oxygen, are proving to be key to treating these people, who seem to comprise around 10 percent of cases. Governments are already preparing for what a shortage of ventilators could do to their health care systems.

In a call to U.S. governors on Monday that was shared with The New York Times, President Donald Trump told states not to rely fully on the federal government for equipment. "Respirators, ventilators, all of the equipment -- try getting it yourselves," he said, according to The Times. "We will be backing you, but try getting it yourselves. Point of sales, much better, much more direct if you can get it yourself." Anthony Fauci, the director of the National Institute of Allergy and Infectious Diseases, said on CNN that the U.S. has stockpiled 12,700 ventilators, but in a worst-case scenario that number might not be enough. In Italy, he added, physicians are having to make "very tough decisions" about whom to treat.

This discussion has been archived. No new comments can be posted.

People Are Trying to Make DIY Ventilators To Meet Coronavirus Demand

Comments Filter:
  • Similarity to CPAP? (Score:4, Interesting)

    by dpilot ( 134227 ) on Tuesday March 17, 2020 @06:50PM (#59842262) Homepage Journal

    How similar is a ventilator to a CPAP? That would particularly apply to the pressure-modulating CPAP machines - ResMed calls it "Exhaust Pressure Relief", the machine practically breathes with you, reducing pressure when you exhale, increasing when you inhale. Take that and turn the pressure up, and does it start to sound something like a (possibly weak, but strong enough for some patients) ventilator?

    • by Travco ( 1872216 )
      Same Question, just late
    • "How similar is a ventilator to a CPAP? "
      Perhaps if you combine it with an O2-concentrator from Amazon or China?

    • by guruevi ( 827432 ) on Tuesday March 17, 2020 @07:50PM (#59842444)

      They are very similar. A CPAP or BiPAP machine is not intended to run 24/7. It's more of an FDA clearance thing, a well designed CPAP will serve as a ventilator in a pinch but don't rely on it for medical care.

      • Re: (Score:2, Troll)

        Comment removed based on user account deletion
        • It's amazing how reliable CPAPs are. I'm on my 5th (my gov't buys me 75% of one every 5 years - I live in a civilized country) and I've never had a problem. Just change the filters sporadically. Let you know what my BiPAP experience is in 5 years if I survive COVID :)
        • Well, if these are remotely useful, I'd start with whoever makes the best one and tell them to make a crap ton more. You might ask for some design changes on some other versions to increase reliability. Of course if they can change to making ventilators, that works too, but time is something we don't have.

          From the way the news is talking we are probably following Italy's path. They have over 2500 dead and we are way bigger than Italy, nor is it over for Italy.

          Donald Trump really needs to resign asap. He should apologize and beg forgiveness for not taking this seriously and telling everyone else not to and then resign. That might be enough to wake some people up and save lives.

          So then I suppose the leadership in almost every other major country should start updating their resume by that standard since it looks to me like the United States still has a pretty low infection rate compared to other countries. Trump made the call to close off borders to certain countries early on and the TDS crowd criticized him as being racist and xenophobic because of that call. Now the TDS crowd is complaining that he's not doing enough. Trump has obviously been taking this seriously, but at the

          • by tflf ( 4410717 ) on Wednesday March 18, 2020 @09:47AM (#59844088)

            So then I suppose the leadership in almost every other major country should start updating their resume by that standard since it looks to me like the United States still has a pretty low infection rate compared to other countries.

            Let's not forget your brilliant leader road the hoax ponies on this issue for several weeks, instead of being proactive. As I remember him stating: all fake news from China. When that sad gelding finally started flagging, he switched horses and road the "fake plot by the Democrats to bring him down" filly for several days.

            It's still early days in the USA, so any leadership judgment is premature. A lot of experts, inside and outside of the USA, are calling Trump out for his delays in taking the necessary and appropriate steps. As a Canadian, it's frightening when the American press and health experts point to the Canadian government as an example of how the USA should react in any crisis. Our political leadership is hardly a shining light or beacon of hope at the best of times.
                  I suspect this is not getting much press in most of the States, but, several Canadian provincial governments have been begging Americans to stay on their side of the border. Why? The spread rate in the USA is currently much higher than here (so far), and too many jurisdictions in the USA are still delaying implementing even the basic necessary measures now universally in place in Canada.

            • by xxd ( 2579459 )
              You won't be so smug when the healthcare systems in Ontario and BC start collapsing in about two weeks under the strain of cases. Your poster boy should resign: he didn't shut down flights and the border until after his own wife tested positive and there was community spread. Not only that: flights are still inbound to Canada even though there are recommended stay-at-home orders in provinces. Here's my prediction: This virus will wipe the smugness off your face about how much "better" you are than the US.
              • by guruevi ( 827432 )

                2 weeks? Toronto hospitals have closed. Their system collapsed about a week ago, they're sending most of their non-critical patients home without any treatment. Non-critical basically means - if you're not close to death already, they won't treat you - if you have cancer or needed surgery for something that's not immediately going to kill you, tough shit, you'll die in 6 months, that's non-critical rationed care for you. In response, a lot of Canadian people are overwhelming NY hospital systems.

                When Cuomo c

        • by tflf ( 4410717 )

          Well, if these are remotely useful, I'd start with whoever makes the best one and tell them to make a crap ton more. You might ask for some design changes on some other versions to increase reliability.....

          My thoughts as well. All are computer controlled, so, in theory, a bit of programming tweaking might be all that's needed, and, like a printer, many of the newer ones can be updated via the Internet. Won't be a perfect solution but as a stop-gap measure, more likely to be effective than anything cobbled together in a garage.
          Unfortunately, even for factories in North America, many of the required components come from all over the world - Mexico, Malaysia, China, Germany among others.
          With the world-wide medic

          • With the world-wide medical supply chain already struggling, hard to believe there would still be any surplus of CPAP masks and hoses. Adapting those to other more suitable devices feels like obvious solutions for shortages.

            CPAPs are notorious for a high level of non-compliance. There are likely millions of used ones gathering dust in closets all over the USA. I personally know of multiple people including myself who has one but doesn't use it.

      • According to my nurse wife, anyway, there's also a significant difference involving filtration. Ventilators are designed to filter out harmful pathogens from the exhausted breath. CPAP/BiPAP machines just blow it into the air, causing the virus to circulate even more.

        • At least one manufacturer's machines come with dual filters. One you wash, the other you dispose. They don't say what the N factor is for the disposable part.
          • by tflf ( 4410717 )

            Filters are for incoming air, not exhaled, designed for dust and pollen. Most CPAP systems would require updated filters as the N factor for any filters is inadequate for anything as small as a virus. And few have filtration of any description for exhaled air.

            • Filters are for incoming air, not exhaled, designed for dust and pollen.

              Yup, exactly. I have ResMed's latest BiPAP machine, and its only filter is a dust/pollen grade filter for the input air. Same thing for my wife's CPAP (don't know the brand).

        • by guruevi ( 827432 )

          That matters in a hospital setting. For a home setting or isolated (negative pressure) room, doesn't matter. So you can send people that aren't very critical but need assistance home with a CPAP machine until they recover.

          We're talking emergency response, not ideal circumstances.

    • by AHuxley ( 892839 )
      Something most advanced nations could have had ready in time if Communist China would have told the world of its wuflu problem at the start.
      • Comment removed based on user account deletion
        • by AHuxley ( 892839 )
          The NSA and GCHQ where too busy to tell the CDC?
          The CIA and MI6 could have told the CDC but that would have risked in use spying methods?
          Keep the methods safe for more important work than wuflu spreading..
          A bit like the Tet Offensive. The NSA knew but did not want to tell the US mil, to keep their methods safe..
      • by rndmtim ( 664101 )

        We had two months of Wuhan locked down in public before we started getting a major outbreak here. The Chinese could have been more transparent... but you know what? Trump stopped the CDC from telling old people not to get on airplanes two weeks ago because he didn't want to spook the stock market, so it's not like Americans have a leg to stand on here in terms of truthful and transparent government. The NY Times had to leak the CDC's worst case scenario last week which is what triggered at least state level

      • by tflf ( 4410717 )

        Something most advanced nations could have had ready in time if Communist China would have told the world of its wuflu problem at the start.

        Governements knew, they just assumed the problem would stay in China. And when it became obvious it was spreading faster than expected, most governments still denied the possibility of it getting even worse. They all bowed to pressure from many special interest groups, including branches of their own governments, and collectively decided the risk was worth taking to avoid impacting the stock market, or trade, because losing 10 points on the Dow is not an option.

    • People are listening to what I said on March 9th. Finally.

      • I forgot the link.

        "The US has 44% of the world's oxygen concentrators. We also have a huge number of CPAP machines. There are literally millions of dusty oxygen concentrators and CPAP machines sitting unused. This is something China dos not have. Most "oxygen concentrators" in China are the small, battery powered things that produce 30% O2, not 99% O2 like our floor models do. None of these machines are without risks. Some people do not do well on CPAP machines. Oxygen concentrators should not be used aroun

        • Some people do not do well on CPAP machines.

          Unfortunately this is this is case. Some people have a claustrophobic response to the masks that are used. Others object for cosmetic reasons. (And yes, if you're not in a stable relationship, you wonder how your new partner will react when slipping into a CPAP mask is at the end of your afterplay.) Lately, nasal prongs have been developed. They're not canulas: they have a soft seal (marketed as "nasal pillows") that don't work as well as masks at higher CPAP pressures.

          I don't know what pressures ventilator

    • How similar is a ventilator to a CPAP? That would particularly apply to the pressure-modulating CPAP machines - ResMed calls it "Exhaust Pressure Relief", the machine practically breathes with you, reducing pressure when you exhale, increasing when you inhale. Take that and turn the pressure up, and does it start to sound something like a (possibly weak, but strong enough for some patients) ventilator?

      I've been wondering the same thing. CPAPs are notorious for non-compliance. I personally know multiple people who have one collecting dust including myself. The default settings are "assisted breathing" where you have to start to take a breath before it kicks in which is likely good enough for many patients but I know you can adjust the settings for both stronger breaths and presumably more forced and continuous operations as well.

  • For the record (Score:4, Insightful)

    by JustAnotherOldGuy ( 4145623 ) on Tuesday March 17, 2020 @07:51PM (#59842448) Journal

    Just posting this for reference and because I find it relevant, now that Trump is telling states to "find your own ventilators and stuff lol".

    January 22: “We have it totally under control. It’s one person coming in from China. It’s going to be just fine.”

    February 2: “We pretty much shut it down coming in from China.”

    February 24: “The Coronavirus is very much under control in the USA Stock Market starting to look very good to me!” (The market crashed later that day)

    February 25: “CDC and my Administration are doing a GREAT job of handling Coronavirus.”

    February 25: “I think that's a problem that’s going to go away They have studied it. They know very much. In fact, we’re very close to a vaccine.”

    February 26: “The 15 (cases in the US) within a couple of days is going to be down to close to zero.”

    February 26: “We're going very substantially down, not up.”

    February 27: “One day it’s like a miracle, it will disappear.”

    February 28: “We're ordering a lot of supplies. We're ordering a lot of, uh, elements that frankly we wouldn't be ordering unless it was something like this. But we're ordering a lot of different elements of medical.”

    March 2: “You take a solid flu vaccine, you don't think that could have an impact, or much of an impact, on corona?”

    March 2: “A lot of things are happening, a lot of very exciting things are happening and they’re happening very rapidly.”

    March 4: “If we have thousands or hundreds of thousands of people that get better just by, you know, sitting around and even going to work — some of them go to work, but they get better.”

    March 5: “I NEVER said people that are feeling sick should go to work.”

    March 5: “The United States has, as of now, only 129 cases and 11 deaths. We are working very hard to keep these numbers as low as possible!”

    March 6: “I think we’re doing a really good job in this country at keeping it down a tremendous job at keeping it down.”

    March 6: “Anybody right now, and yesterday, anybody that needs a test gets a test. They’re there. And the tests are beautiful. the tests are all perfect like the letter was perfect. The transcription was perfect. Right? This was not as perfect as that but pretty good.”

    March 6: “I like this stuff. I really get it. People are surprised that I understand it Every one of these doctors said, ‘How do you know so much about this?’ Maybe I have a natural ability. Maybe I should have done that instead of running for president.”

    March 6: “I don't need to have the numbers double because of one ship that wasn't our fault.”

    March 8: “We have a perfectly coordinated and fine tuned plan at the White House for our attack on CoronaVirus.”

    March 9: “This blindsided the world.”

    March 10: "I've been briefed on every contingency you could possibly imagine. Many contingencies. A lot of positive. Different numbers, all different numbers, very large numbers, and some small numbers too."

    March 13: "I don't take responsibility at all."

    March 16: “I’d rate it a 10,” Trump said at a White House press briefing Monday when asked by a reporter how he would rate his response to the pandemic.

    March 17: "The country is very strong - -it has never been so strong."

    • Re: (Score:2, Informative)

      by AHuxley ( 892839 )
      The WHO had its top experts on stigmatization out to tell the world about what words to use.
      Now nations lost weeks to get ready and have to DIY medical parts...
      • The WHO had its top experts on stigmatization out to tell the world about what words to use. Now nations lost weeks to get ready and have to DIY medical parts...

        Have you lost your mind? The US and every other country on the planet is completely independent from the WHO when it comes to pandemic response. So even if what you are saying is true how does it impact the US response? The US has accepted basically nothing from the WHO - including test kits. So quit your fingerpointing and your excessive drug use because you're definitely not living in reality.

      • I like this notion that the WHO is some agency that's supposed to save us or something.

        The WHO is an advisor to what's happening. If National leaders don't want to listen, the WHO can't make them do squat. The failures here are the leaders of these countries that are having people die from this. The failure here are the leaders of these countries that are running short on supplies. The failure here are the leaders of these countries that allowed panic crowds to flood grocery stores, airports, and elsewh

        • by RedK ( 112790 )

          The WHO is an advisor to what's happening.

          Yes, and here, they've been hammering about soft-racism and stigmatization and arguing names instead of advising countries on measures and responses.

          Time to get these nutjobs who push racism and sexism and gender crap into everything out of these organisation.

    • by xxd ( 2579459 )
      Justin Trudea is a poster boy progressive. He handled things worse than Trump. You progressives *do not* have a better grasp on things.
      • Justin Trudea is a poster boy progressive. He handled things worse than Trump. You progressives *do not* have a better grasp on things.

        That's nice, but we're not talking about Justin Trudeau; we're talking about Trump. Please focus, and do try to keep up.

  • by Arethan ( 223197 ) on Tuesday March 17, 2020 @08:03PM (#59842490) Journal

    You really don't need to reinvent the wheel here. A CPAP is effectively a "ventilator" that doesn't require an invasive entry to your windpipe (ie, they cut a hole in your neck and attach it there). If you're brain dead, you'll need a ventilator. If you can still breath on your own but have some difficulty, a CPAP could potentially work instead. We won't use them in the US as a ventilator substitute because the FDA prevents healthcare providers from being inventive on-demand, but I'm a bit surprised we haven't seen other countries jumping at that opportunity.

  • by rilister ( 316428 ) on Tuesday March 17, 2020 @08:09PM (#59842504)

    I'm posting this because I think it's important but by all means use the skills that you have to help. If you're an engineer, see if you can solve the supply problems of ventilators, it can't hurt.

    But I hope we're solving the right problems. I have a friend who is an ECMO nurse, right now providing life-support to people in respiratory collapse due to COVID-19. I asked her if lack of ventilators are the problem, she tells me that down the line she see two bigger problems, lack of beds and lack of staff:
    "Covid already on my service and increasing daily. We are all so creeped out by this. Most of us clinicians assume we have been exposed, since....supplies are being rationed, and nobody gets a mask unless their patient had a fever, despite 70% of infected people being asymptomatic.... Other countries are gowning and gloving and masking (if not monkey suiting) their entire hospital staff."

    So the lack of protective equipment is going to lead to the critical staff getting sick and there won't be the clinical capacity to provide the care.
    I'm just hearing this now, I don't know the right answer: offer our protective gear to hospitals? I have 10 N95 masks in my garage I don't really need.

    In any case, if you can support a nurse or a doctor somehow, please do, they are the frontline. You might not believe that this is going to be the all-out disaster many are predicting, but these people are overwhelmed already and will get sick.

    • by labnet ( 457441 ) on Tuesday March 17, 2020 @10:39PM (#59842882)

      Sucks to be in a for profit healthcare system with no coordinated response.
      When will Americans rise up against the corporate stranglehold on government?
      Maybe COVID will be USAs awakening?

    • I'm just hearing this now, I don't know the right answer: offer our protective gear to hospitals? I have 10 N95 masks in my garage I don't really need.

      In any case, if you can support a nurse or a doctor somehow, please do, they are the frontline.

      Just a quick google shows that they're looking in to using out of date n95 masks: https://www.cdc.gov/coronaviru... [cdc.gov] So yes, check what you have (like brand, date) then look at the web page of your local hospital to see if there's any information concerning donating equipment before you contact them.

    • by gweihir ( 88907 )

      Indeed. You cannot just hook a person up to some air pump and think that is it. There is a lot more to it and most of that comes from the clinical staff in the trenches. These DIY devices would probably do much more harm than good. Remember, the people proposing these designs are _makers_. Most of them are not even engineers and basically none are biomedical engineers. My take is that these are people that a) have no clue about the complexities involved in ventilating somebody for more than a few minutes bu

      • I AM a medical device engineer (for the past 8 years), and though I've not worked on breathing assist devices, I do know about the complexities of designing a safe and effective device AND THEN getting accurate and reliable prototypes and production parts made. The naive belief is that you just need an air pump, some buttons, and tubes and your good to go. Peoples' lungs are delicate and can easily be overinflated and damaged (potentially fatally) with incorrect air pressures. One of the very important a
      • by xxd ( 2579459 )
        I'm guessing better than nothing. If you are over 65 and not getting a ventilator but instead have been triaged to just die, then nothing wrong with trying a CPAP. If 80% of those who were going to die still die and 20% live then it's still a win. Bureacracy isn't going to save anyone.
    • by xxd ( 2579459 )
      Test test test and test some more. Those folks who are immune should be invited to volunteer.
  • If there was a way to 3d print ventilators somehow and someone published a good design, that seems like a way to mass produce quite a few quickly.

    Anyone know of such an effort?
    • The resolution needed to capture the particulate matter and still allow air is beyond most (if not all printers), that is why filters are made of fiberous materials.
      • We don't need to 3d print filters, just like we don't need to 3d print the actual fan motors or electronics or anything else. If it needs a filter, include a spot for the filter to be held. A quick google search shows some ventilators use flat cotton filters that are washable and held in a flat plastic frame, easy for manufacturing with a 3d printer.

    • by gweihir ( 88907 )

      Forget it. There is a lot of complexity here not accessible to non-experts. Also, the machine itself is only a small part of the problem of caring for a ventilated patient.

    • by rastos1 ( 601318 )

      If there was a way to 3d print ventilators somehow ...

      Yes, there is [google.com].

      Italian 3D Printing Startup Creates Replacement Respirator Valves for COVID-19 Patients [extremetech.com]
      Coronavirus: 3D printers save hospital with valves [bbc.com]
      Italian Hospital 3D Prints Medical Valves for COVID-19 Patients [plasticstoday.com]

      No idea about published data files.

      • Think of this analogy: you can 3D print keyboard keycaps, but you can't make a 3D printed keyboard. At the very least, there are necessary components that are currently made out of non-3D printed materials (metal, rubber, some plastics) that would need to be made by some other method. And then, a good deal of the design complexity is customizing all the parts to work together, like getting the traces on the keyboard PCB to line up with the buttons while still having spots for mounting holes, connectors, e
      • by hoofie ( 201045 )

        It's a valve - one part of an entire system.

        Not a ventilator.

  • I can just sit and huff the O2 from my welding rig.

  • Here is an over-simplified version of how to program and use a ventilator: https://www.youtube.com/watch?... [youtube.com]

    If you followed that, some of the parts you need to assemble before trying to build a DIY ventilator include:
    * oxygen supply
    * pressure sensor
    * flow sensor
    * digital pulse oximeter

    Then you can tie it all together.

    Good luck.

    • by gweihir ( 88907 )

      Also keep in mind that it is pretty easy to blow yourself up or set yourself on fire when tinkering with pure Oxygen. That stuff is dangerous.

  • Medical devices used in hospitals have to be certified so many ways it will make your head spin. It is literally a chipper shredder of certification to make sure the equipment performs exactly as advertised, first time, every time, no mistakes, no misfires. If you can't certify that it will do that, and the testing bears it out, don't spend the money to develop something like this because you'll just be burning money. Plus your manufacturing plant will have to be carrying all sorts of certs as well.
    • by gweihir ( 88907 )

      Indeed. And a lot of that is not just red tape, but needed. Ventilating somebody is a tricky thing and lots of things can go wrong.

    • Furthermore, when I've been hospitalized, I've had to bring my CPAP with me, and it undergoes some sort of testing before they'll let me use it there. (There aren't any "loaners" available.)

      I'd love to be able to sell/donate my old machines, but the gov't won't let me. Oh well they paid 75% of its cost.

      What really pisses me off is that the gov't won't let me buy medical oxygen except on Rx, even if I'm willing to do it out-of-pocket. There are some downsides to gov't medicine, but having lived under both s

    • I think that's sort of the point of this. If your country has a sharp rise in cases, then there won't be any hospitals available for you to go to. You may get a triage in the car park and be told to go home and take paracetamol.

      What we know of Covid is that you can have respiratory failure, which will obviously kill you if not handled. In a choice between lying in bed at home facing imminent respiratory failure and telling your family you love them and are sorry you have to leave them, or using a DIY ventil

  • N1000, here we come:

    http://www.sorgonet.com/xtreme/gas-mask/

  • by sugarmatic ( 232216 ) on Wednesday March 18, 2020 @09:04AM (#59843986)

    Every paper and release in medical journals to date on the use of noninvasive ventilation for the present Covid-19 outbreak shows it is useless for all but a thin sliver of patients, and has a high potential to kill people rather than save their life.

    Every one of the papers. Not a single one in favor of emergency therapy with nonincasive vents compared to high flow O2.

    In addition, the lack of expiration filtering typical of them has been a realized infection threat for medical personal- it infected lots of Chinese medical personnel.

    The bottom line: high flow oxygen (cannulas more than masks), and intubation with aspiration and full mechanical ventilation is the only therapy that improves outcomes for easily 90% of patients, despite an overall continued use of 30% to 40% in the field of noninvasive ventilation.

    This is what the data says. Nonincasive vents dont aspirate fluids from the lungs, and can cause damage, and present infection risks greater than intubatiom and generally greater than benefits at all for ARDS (acute respiratory distress syndrome) patients.

    These DIY units are laudable but largely useless even in a worst case scenario, as much as it would be nice to be otherwise.

    • by ebvwfbw ( 864834 )

      I think it's close to a fact that if you're intubated you're done. It's just a matter of a short time.

      • The survival rates after intubation range widely by demographics between 10% and 60%, averaging closer to 50%.

        That's a lot better at both ends than without.

        • by ebvwfbw ( 864834 )

          Not that I doubt you, however I'd love to know where you're getting your numbers. The feeds that I have don't show that.
          What I can tell you is in Italy the people dying if I'm not mistaken 100% of them already had something else wrong with them.
          I hear if you're in Iran, in jail - bend over and kiss your butt goodbye. They're not helping them.

          I found a site that had WHO situation data and it used to have percentages. That seems to be gone shortly after I pointed out that this is no worse than what happened i

  • A thought.

    Negative pressure ventilators (i.e. old style iron lungs) are simpler and might possibly be easier to produce as a stopgap solution.

Love may laugh at locksmiths, but he has a profound respect for money bags. -- Sidney Paternoster, "The Folly of the Wise"

Working...