Want to read Slashdot from your mobile device? Point it at m.slashdot.org and keep reading!

 



Forgot your password?
typodupeerror
×
Power Transportation

Germany Unveils a Hydrogen-Powered Passenger Train (fortune.com) 199

An anonymous reader writes: The world's first CO2-emission-free train powered through hydrogen was unveiled this week in Germany. The Coradia iLint, created by French company Alstom, was presented at the Berlin InnoTrans trade show on Tuesday. The train's energy comes from combining hydrogen stored in tanks on the train with oxygen in the air. The energy is then stored in lithium-ion batteries. The train's only emissions are steam and condensed water. The train also has lower noise levels than diesel trains, emitting only the sound of its wheels on the track and any sounds from air resistance at even its highest speed of 140 kilometers per hour (about 87 miles per hour). The train has the ability to travel up to 800 kilometers (497 miles) and carry up to 300 passengers; it's the worldâ(TM)s first hydrogen passenger train that can regularly operate long journeys.
This discussion has been archived. No new comments can be posted.

Germany Unveils a Hydrogen-Powered Passenger Train

Comments Filter:
  • Oblig. (Score:3, Funny)

    by Anonymous Coward on Thursday September 22, 2016 @12:41PM (#52939721)

    Oh the humanity!!

    • by lbmouse ( 473316 )
      Those crazy Germans, they never learn!
  • That can happen when you don't blink often enough.

  • by PhantomHarlock ( 189617 ) on Thursday September 22, 2016 @12:50PM (#52939795)

    Currently it is incredibly energy intensive to separate hydrogen from oxygen. What power plant is powering the separator? If it's anything but nuclear, hydro, solar or wind, then it's powered by whatever fossil fuel is doing the separation, and at a much lower efficiency than simply putting diesel fuel into a diesel-electric or directly powering an electric train by overhead catenary. In the end you're just centralizing the pollution.

    If the separator is run by a non-fossil fuel source, then more power to them.

    • by tomhath ( 637240 ) on Thursday September 22, 2016 @01:03PM (#52939925)
      Here's a better link [railway-technology.com]. As I read it, the idea is to use extra electricity from intermittent power sources such as wind and solar to produce hydrogen, which can then be stored and transported to where it's needed. That seems far better than trying to store electricity in huge batteries.

      Thompson's calculations, based on a 2007 set of figures from India Rail, estimate that as much as three billion barrels of crude oil - or the equivalent of 214 million tonnes of CO2 - could be saved over one year by transitioning from diesel to hydrail.

      "The two magic properties of hydrogen are the ability to store and transport it," Thompson says. "It's that utility of time and place which is unique to the hydrogen economy. And that's what you can't do with the existing power grid."

      There's also an economic reason behind investing in windmills instead of diesel oil, as Busch explains: "We have fluctuations in wind and solar energy which gives us the chance to produce energy for very, very cheap."

      • by OpenSourced ( 323149 ) on Thursday September 22, 2016 @01:09PM (#52939989) Journal

        Surprise, surprise, the Germans had already thought about the objections that could muster the Slashdot crowd.

        • No they haven't. This is an extremely inefficient use of "green" power, alternative storage methods would be superior to hydrogen

          • Yes, better to use the excess electricity to push the train up a hill. When you need it, just disengage the break. It might be hard to board the train when it's flying through the station at 180kph, though.
      • That seems far better than trying to store electricity in huge batteries.

        It may not seem that way if you do the cost comparison.

    • Germany is pretty decent with using renewable energy sources. The sources I can find say it's over 25% and rising. Electrified rail may be a better way to go efficiency-wise, but that requires running a bunch of copper along existing railways; and mining copper and then purifying it via electrolysis takes quite a lot of energy. So at least for medium-term, hydrogen makes sense.
      • Of course we would love to electrify those remaining routes that are mot yet.
        However in the last decades traffic has increased dramatically. Human transport I mean.
        All main tracks are obviously electrified. But plenty of rural areas are not. Those areas often only have a single track, instead two parallel tracks. So you have to balance if you shut down that single track to work in the electrification or if you keep it running, by Diesel or now perhaps in future by H2 or natural gas.
        Bottom line it is a doubl

        • Yeah, the DC metro is currently getting worried about that last bit because of shutdowns related to massive repairs it's undertaking. Although that's just one of a long list of problems with that system.
    • by GuB-42 ( 2483988 )

      Germany has plenty of solar and wind, which have a nasty tendency to give you plenty of power when you don't need it.
      H2 production can be seen as way to store that energy, with a much better capacity than batteries.

      • Re: (Score:3, Informative)

        by mspohr ( 589790 )

        H2 is very inefficient compared to batteries.
        This diagram explains it in detail...
        http://cdn.greenoptimistic.com... [greenoptimistic.com]
        Bottom line, only about 20% efficient compared to battery 69% efficient.
        More detail here:
        http://www.greenoptimistic.com... [greenoptimistic.com]

        • If the hydrogen chain (generation, storage, burning) is very cheap, it may be a better option than battery storage which still is hideously expensive. Especially when converting surplus power, which in terms of €€€ is worth bugger all.
          • by mspohr ( 589790 )

            If you'll read the references, you'll see that batteries are much cheaper. The equipment needed to convert surplus electricity to H2, compress it, store it, transport it and convert it back to electricity is much more expensive than batteries.

        • by PCM2 ( 4486 )

          I think your diagram might be misleading for the Germans' particular use case.

          Presumably, the transport/transfer phase here is where the hydrogen is taken to some kind of "filling station" where fuel cell vehicles will be fitted with fuel cells. It seems to me you can cut out some of these steps/losses when the vehicle you're filling up with hydrogen is itself a train, which is more than powerful enough to transport large volume of hydrogen all by itself. Build a line out to the the electrolysis plant and t

          • by mspohr ( 589790 )

            They may be able to save a bit on the transport step if they can pull the train up to the H2 factory although you have to drive the train to the H2 factory. However, this only saves a few percent and still leaves a huge gap in efficiency between batteries at 70% and H2 at 20%.

    • by Sique ( 173459 )
      Actually, it costs about the same energy to separate hydrogen from oxygen as it will release when united again. There's that nice thing called Laws of Thermodynamics. Hydrogen in this case is a way to store energy, not to generate it. So whenever you have surplus energy, you store it by generating Hydrogen, and then you release it in the fuel cells of the train to power it. The amount of energy you can store by generating Hydrogen is by far higher than Lithium-Ion or even Sulfur-Air batteries.
    • Currently it is incredibly energy intensive to separate hydrogen from oxygen.
      No it is not
      Why come pleople always up with such nonsense?

      Regardles how you get your H2, Electrolysis or from CH4: it is more energy efficient than burning Diesel!

    • Comment removed based on user account deletion
    • Hydrogen is a waste product from many industrial processes, e.g. Platforming. Any refinery with a reformer but only a handful of hydrofiners are likely just pumping pure hydrogen into the air via their flaring system, or putting it to fuel gas if their burners can handle it.

      Many refineries have excess hydrogen. Many air separation plants which feed the refineries which don't generate their own have a heck of a lot left over. For the uninitiated, in the oil and gas industry they burn a shitton of hydrogen be

    • by rch7 ( 4086979 )

      Practical electrolysis is up to 70 efficient. "Currently it is incredibly energy intensive to separate hydrogen from oxygen" - it is just incredibly uninformed scary-mongering, kind of the one Musk uses to denigrate competing technologies.

  • I guess it depends on how you generate the hydrogen. If you do so by cheap electricity produced by burning coal, it might not be so CO2-emission-free...
    • If you read the first word of the title, it says Germany. Germany is famed for their wind and solar power production.

    • Even in a worse case scenario and none of the hydrogen was generated by renewables, you're still only producing pollution in one spot rather than spreading it around across the country. In one spot it is easier to scrub it to get the worst of it out of the environment, it is easier to turn the pollution into usable products, etc.

      1.2units of nasty stuff at a powerplant might be preferable to 1 unit of nasty stuff pumped directly into the environment on the back of a train.

  • by Bugler412 ( 2610815 ) on Thursday September 22, 2016 @12:55PM (#52939857)
    How was the hydrogen used in the train produced and delivered?
  • by harrkev ( 623093 ) <kevin@harrelson.gmail@com> on Thursday September 22, 2016 @12:57PM (#52939873) Homepage

    OK. How efficient is hydrogen, really? Shout out to all of the chemistry majors out there who might answer this.

    One of the reasons that fuels work, from my understanding, is that you start with a small number of molecule, combust them, and get a larger number of molecules with more heat. The heat increases the pressure, and the increase in the number of molecules increases the pressure.

    Example: combustion of alcohol:

    C2H6O +3O2 --> 3H2O + 2CO2

    We start with four molecules on the left, and get five molecules on the right. Even if the reaction was not exothermic, we would still get a pressure increase good for pushing a piston.

    Now, when we burn hydrogen, we get a decrease in the number of molecules (goes from three down to two):

    2H2 + O2 --> 2H2O

    So, yes, we get increased pressure due to heat production, but we get decreased pressure due to fewer molecules.

    So, I guess that my question is: when burning a fuel, how much pressure created is due to the typical increase in molecules, and how much pressure is due to heat?

    • I assume since it is noiseless it is using a fuel cell. As to your concern with pressure, I know that the Wankel is the preferred ICE for hydrogen. Not sure why but it is more efficient than a piston engine.
      • Comment removed based on user account deletion
        • This goes back to the OPs original post. You can have two pressure 'sources'. Pressure from heat and pressure from molecules. With pressure from heat you need to transfer the pressure as quickly as possible because your efficiency losses to the walls of the chamber are greater. In a wankle engine that expansion period is much shorter. I think this is the way you get greater efficiency with water injection in a piston engine, you convert a portion of that combustion temperature to gas.
    • by hey! ( 33014 ) on Thursday September 22, 2016 @01:38PM (#52940273) Homepage Journal

      Conversion efficiency is not a big deal when you're using renewable sources; in those cases you're interested in capital investment efficiency (what you get out for dollar invested).

      That's because wind or solar or tidal you don't capture simply goes away; the waste is 100% when you don't use it, so if you capture any of it, it's a win, so long as the money up front isn't too much.

      • Right now the H2 in question is 'waste' from big chemical plants, that would burned otherwise.
        However wind plant operators plan to produce H2 and feed it as supplement into the natural gas grid.
        Of course with the transformation of Germany to 100% renewable energy production, production of H2 or other synthetic gases is better than shutting down power plants or disconnecting them.

      • Conversion efficiency is a big deal when you're using a mix of renewable and fossil fuel energy sources. It makes little sense to send renewable energy to a train at (say) 20% efficiency causing a shortage in the electrical grid which needs to be made up by a fossil fuel plant operating at 50% efficiency (overall average 35% efficiency), if you can instead use the renewable energy directly on the grid at 70% efficiency and power the train with fossil fuel at 40% efficiency (overall average 55% efficiency).
    • In such an reaction we don't really express stuff in molecules, but in 'mol mass'. https://en.wikipedia.org/wiki/... [wikipedia.org]
      And then comes Thermodynamics, Yay!

      At same temperature, all gases with X molecules consume approximately the same volume (that is still Chemistry, .law of Avorogardo, or Avocado ... well, it is in the link above ;) ) So 2 * H2 + 1 * O2 -> 2 * H2O, we have 3 molecules on the left side and 2 on the right, so the volume is reduced by 1/3.

      On the other hand, here now comes the thermodynamics, th

    • Another thing, H2O is a lousy combustion product if you are building an ICE. The problem is that H2O has a very high heat of vaporization, 44kJ/mol, and it is nearly impossible to recover this heat. When you burn hydrogen in an ICE, you are spending a lot of energy essentially boiling water. You get 286kJ from burning a mole of H2 gas, but you lose 15% of that heat because you cannot condense the water vapor.

    • If you read carefully, you might notice that these trains are electric, and that they use fuel cells to produce electricity that is stored in batteries and distributed from there. So no business with pressure etc. (But this is /., R'ing TFA is too much trouble....)

    • You need an equation of state. Let's assume that we're dealind with ideal gas mixture so we get: P*V=n*R*T. R is a constant and since you ask about the pressure, I'll assume that you keep the volume constant, so V is also a constant. Now you need to write the equation down for the before/after case, say with subscript 1 for the reactants and with subscript 2 for the products:
      P1*V=n1*R*T1 and P2*V=n2*R*T2. Now you divide them, cancel off the constants and you get: P2/P1=n2*T2/(n1*T1). Wikipedia tells me that

      • OMG, I made a terrible mistake. That'll teach me to post such things late at night with a low blood sugar...

        For the temperature, of course, you need the increase factor, not the difference! So there is T1=20 C=293 K and T2=3200 C=3473 K. So now properly we get T2=3473*T1/293=>T2=12*T1 (approximately).

        So there you have it: Factor 12 pressure increase from the temperature and factor 0.67 pressure decrease from the molecule change. The temperature still wins.

        Sorry about the confusion.

    • The gas is not at Standard Temperature and Pressure (STP) -- so your volumetric calculations would have to depend on that. A mole of air takes up 22.4 liters while a mole of water is about 18 mL at STP -- since it's in liquid form. Now, if we take 1 mole of H2 and 1/2 mole of O2, we'd have ~32 liters of gas which would become 18 mL of water -- which is essentially a massive vacuum. ...but then again, no one stores H2 at STP.

  • Until you figure out that 95% of the hydrogen is produced from carbon fuels.

    https://en.wikipedia.org/wiki/... [wikipedia.org]

  • One as mentioned, hydrogen production is probably just moving the emissions, and adding more due to efficiency losses.

    Two, They are using Note 7 recall batteries for storage!

  • The world's first CO2-emission-free train powered through hydrogen was unveiled this week in Germany.

    Note that they haven't built or sold any production units yet. Just some prototypes.

    The train's energy comes from combining hydrogen stored in tanks on the train with oxygen in the air.

    It's a fuel cell system [railwaygazette.com] so yeah, that's kind of how it works.

    The energy is then stored in lithium-ion batteries.

    The company that makes this train says nothing about Li-Ion batteries [alstom.com] being involved.

    The train's only emissions are steam and condensed water.

    Correct but misleading. The real emissions depend on how the hydrogen was produced. If they got it by cracking hydrocarbons then the real emissions are considerably nastier than just water.

  • It was a gas!
  • CO2-emission-free train

    This is a total crock. You have to also look at how the Hydrogen is being produced. And not some theoretical but not real theory of how it could be made by electrolysis, but the real truth of how it is being made by a very dirty and wasteful process that breaks down natural gas and captures some hydrogen in the process. The truth of the matter is it would be much cleaner overall to just run the train on liquid natural gas. This Hydrogen bullshit is all smoke and mirrors with

    • Why don't you read the summary and the linked article or just google for the topic and find better articles than making an complete idiot out of yourself? (*facepalm*)

      • I used to think Slashdot was a tech news aggregating site, now I think it's just an overly complex idiot honey pot. I'm not entirely clear on the long term plan.

        • now I think it's just an overly complex idiot honey pot. I'm not entirely clear on the long term plan.

          If you can't make money from rich technical people who are also idiots, you can't make money from anyone!

  • Go gas, go boom!
  • by bradley13 ( 1118935 ) on Thursday September 22, 2016 @01:58PM (#52940449) Homepage

    Ok, my chemistry is a long time in the past, but AFAIK hydrogen is a really stupid fuel to choose. It is the smallest atom possible; even H2, the usual form of hydrogen gas, is tiny. That makes it incredibly hard to contain. Also, none of our existing infrastructure can handle it.

    If you are going to manufacture fuel, you are better off producing methane (natural gas, CH4). It does require a second reaction: After electrolizing water to produce H2, you then catalyze the H2 with CO2 to produce methane and water. So the overall process is more complex, but the result is not only much easier to store, we already have the infrastructure for transporting and storing methane.

    This line from TFA is also a laugh: "operating costs will be similar to the operating costs of diesel units." Sure, except for the cost of building a completely new infrastructure to produce, transport and store hydrogen. Which doesn't count as "operating costs".

    • by PCM2 ( 4486 )

      Sure, except for the cost of building a completely new infrastructure to produce, transport and store hydrogen.

      You mean something like a ... railroad? With trains bearing big tanks of hydrogen fuel on the tracks?

  • So if I use a Tesla in France, then France introduced a new electric car right?

  • Trains are in the unique situation that supplying external electricity is relatively easy, you string up a cable above the track. It is the form of EV that has been practical for decades and is widely deployed so why would you create such a complicated alternative? Yes, you could argue the less used or longer remote tracks would be expensive to electrify but do wonder if a hydrogen hybrid stacks up economically for those cases anyway.

    Full disclosure: I thought hydrogen vehicles where dumb when I first
  • Afterall, they gave all their trans rapid tech to China.

"Experience has proved that some people indeed know everything." -- Russell Baker

Working...