scharkalvin writes with this excerpt from the American Radio Relay League's site: "'For the second time since 1992, Heathkit Educational Services (HES) has shuttered its doors. Rumors of the legendary kit-building company's demise were posted on QRZ.com, with several readers bringing the news to the attention of the ARRL. In August 2011, Heathkit announced it was returning to the kit building business, and in September, that it would once again be manufacturing Amateur Radio kits. ... On LinkedIn, a popular networking site, HES Chief Executive Officer Lori Marciniak listed her employment ending at Heathkit as of March 2012. Likewise, Heathkit's Marketing and Sales Director Ernie Wake listed his employment ending in April 2012. An unsubstantiated report on Wikipedia states that "[in] December 2011, Heathkit Educational Systems laid off most employees and in March 2012, the company indefinitely suspended operations."' It looks like Heathkit is gone for good. Their plans on re-entering the kit market died with the current economy."

angry tapir writes "HP has unveiled an all-in-one thin client capable of being powered by an Ethernet cable. The t410 AiO supports the Type 1 Power over Ethernet (PoE) standard, which means it is capable of drawing its power from a network connection, although it can be powered by standard AC power. It uses an ARM-based processor and has an integrated 18.5-inch monitor, and it is capable of being used for virtual desktops through Windows RDP, VMware View and Citrix ICA."

jfruh writes "You might think that flat files, VAXen, and punch card readers are things of the past — and you're right, for the most part. But here and there, these fossilized technologies have found places where they can survive in production use."

First time accepted submitter kmoser writes "Like most people, I have a couple of surge protectors for sensitive/important electronics, and even a UPS for a couple of items like computers. But I don't have surge protector on all outlets, and these consumer-grade devices don't cover things like 220 volt appliances. Add to that the fact that I live in a lightning-prone area and it's only a matter of time before one of my expensive devices has a major meltdown. I've looked into full-home surge protectors that install next to the fuse box but the prices vary widely and I have no idea how reliable they are or what brands are good. An electrician friend tells me they can still blow out, and when they do they're difficult to replace if they were installed behind a wall. Can anybody shed some light on the best options for protecting all the electronics in my house with a single surge protector?"

jones_supa writes "Barton George, director of marketing for Dell's Web vertical reveals information about 'Project Sputnik', a laptop tailored for developer needs in web companies. 'We want to find ways to make the developer experience as powerful and simple as possible. And what better way to do that than beginning with a laptop that is both highly mobile and extremely stylish, running the 12.04 LTS release of Ubuntu Linux,' George ponders. He also gives a quick list of packages that the default installation could include. The machine will base on the XPS13, assessing a couple of its main hardware deficiencies along the way." According to the article, this is a "6 month project to investigate an Ubuntu laptop. If successful, we have big plans for the effort." It's unclear how closely they are working with upstream, but there's mention of Canonical as a commercial partner so this may mean Dell is working to ensure some of their hardware Just Works (tm) with Ubuntu. The software side is so far just a customized install with developer tools preinstalled. Ars remains skeptical about Dell's strategy for GNU/Linux support, which may be warranted given their track record.

rrossman2 writes "With the birth of our son (who is now just over two), we have snapped and accumulated a ton of pictures — on Panoramio, Picasa, Facebook, etc. What is the best option for bulk printing the photos to a physical format? We all know how fast technology advances, as well as how fast sites come and go; I want a way to have these pictures for my son when he is older... just like my grandfather has photos of himself from World War II, my parents have photos of me when I was little, etc. Are there any affordable services that you can upload the photos to that print and deliver long-lasting pictures? How well do today's photo ink jets last, and what's the best type of paper? I do have a cheaper Samsung color laser printer, but color lasers don't make the most color-rich prints, and using normal photo paper you can find in big box stores doesn't work out too well, as the laser toner seems to peel off on the rollers and gum things up. (Is there a good long lasting paper that seems to work well with laser printers?) I can see what's going to happen in the future: all of the digital photos people take now are going to either end up on a website that won't be around in 20+ years, or get stuck on disks or flash memory that won't last, or for which interfacing with the media will become difficult or impossible."

angry tapir writes "Micron has said that DDR4 memory — the successor to DDR3 DRAM — will reach computers next year, and that the company has started shipping samples of the upcoming DDR memory type. DDR4 is more power-efficient and faster than DDR3. New forms of DDR memory first make it into servers and desktops, and then into laptops. Micron said it hopes that DDR4 memory will also reach portable devices like tablets, which currently use forms of low-power DDR3 and DDR2 memory."

Volanin writes "Currently I use a triple boot system on my Macbook, including MacOS Lion, Windows 7, and Ubuntu Precise (on which I spend the great majority of my time). To share files between these systems, I have created a huge HFS+ home partition (the MacOS native format, which can also be read in Linux, and in Windows with Paragon HFS). But last week, while working on Ubuntu, my battery ran out and the computer suddenly powered off. When I powered it on again, the filesystem integrity was OK (after a scandisk by MacOS), but a lot of my files' contents were silently corrupted (and my last backup was from August...). Mostly, these files are JPGs, MP3s, and MPG/MOV videos, with a few PDFs scattered around. I want to get rid of the corrupted files, since they waste space uselessly, but the only way I have to check for corruption is opening them up one by one. Is there a good set of tools to verify the integrity by filetype, so I can detect (and delete) my bad files?"

MrSeb writes "Microsoft Research, working with the University of Washington, has developed a Kinect-like system that uses your computer's built-in microphone and speakers to provide object detection and gesture recognition, much in the same way that a submarine uses sonar. Called SoundWave, the new technology uses the Doppler effect to detect any movements and gestures in the proximity of a computer. In the case of SoundWave, your computer's built-in speaker is used to emit ultrasonic (18-22KHz) sound waves, which change frequency depending on where your hand (or body) is in relation to the computer. This change in frequency is measured by your computer's built-in microphone, and then some fairly complex software works out your motion/gesture. The obvious advantage of SoundWave over a product like Kinect is that it uses existing, commodity hardware; it could effectively equip every modern laptop with a gesture-sensing interface. The Microsoft Research team is reporting a 90-100% accuracy rate for SoundWave, even in noisy environments."

An anonymous reader writes "Check out the latest success of the OpenSCAD 3d-printed electronics library. To use it, you just need a 3D printer and some conductive thread. OpenSCAD generates a component holder, and conductive thread wraps it all together — no solder, no etching chemicals, no sending out for anything. The instructable takes you through all the steps from schematic to circuit, and includes a more useful example: the fully printed LED flashlight."

Lucas123 writes "Researchers at Johns Hopkins University have shown they can increase the density, performance and the durability of phase-change memory (PSM) by using diamonds to change the base alloy material. Instead of using the more typical method of applying heat to the alloy to change its state from amorphous to crystalline, thereby laying down bits in the material, the researchers used pressure from diamond-tipped tools. Using pressure versus heat allowed them to slow down the change in order to produce many varying states allowing more data to be stored on the alloy. 'This phase-change memory is more stable than the material used in current flash drives. It works 100 times faster and is rewritable millions of times,' said the study's lead author, Ming Xu, a doctoral student at the Whiting School of Engineering at Johns Hopkins University. 'Within about five years, it could also be used to replace hard drives in computers and give them more memory.'"

New submitter brabq writes "Now that I have a couple of CableCard tuner devices in the house (including the network-based HDHomeRun Prime), I'm thinking of buying one of those all-in-one touchscreen PCs for our kitchen (yeah, something I've always sworn against for future repair reasons). The idea is that it would be used primarily for (1) watching TV, via the aforementioned Prime and WMC, and (2) light web surfing (recipes, some sort of video chat possibly). Does anyone have any experience with these types of devices in a kitchen-like setting (where I'd like to use a touchscreen over having a keyboard/mouse on a kitchen counter)? I keep hearing that Windows 8 is going to have some added benefits to this type of setup — is it worth waiting for its release? My end goal is it has to have a high WAF ... if my wife doesn't like its appearance on the counter or finds it useless, then the whole thing will be a waste."

yyzmcleod writes with this excerpt: "A research team at Queen's University has created a human-scale 3D hologram pod that allows people in different locations to videoconference as if they are standing in front of each other. Called TeleHuman, the technology is the creation of professor Roel Vertegaal, director of the Human Media Lab, and his graduate team at the Queen's University in Kingston, Ontario. Similar to the Star Trek holodeck, participants can walk around the 3D hologram of the remote person they're talking to and view them from all sides. More importantly, the system captures 3D visual cues that 2D video miss, such as head orientation, gaze and overall body posture."

MatthewVD writes "A new, user interface-enabled generation of electronics that you wear under your skin could be used for convenience, or even pleasure, rather than medical reasons. Scientists at Autodesk Research in Toronto have implanted electronics with user buttons, pressure sensors and LEDs under the skin of a cadaver's arm and wrapped in artificial skin. The electronics could buzz you when you have an appointment, carry memory cards with data, or connect you in a social network with others wearing electronics."

jjslash writes "It has been six years in the making, with the original goal of the project intending to reignite computer programming in schools across the country. Despite those honorable intentions, the $35 ARM-based credit-card sized computer has captured the imagination of programmers, consumers and tinkerers alike, resulting in unprecedented demand for the product. Last month the first 10,000 credit-card sized computers were set to make their way to those who pre-ordered them back in February. TechSpot takes a look at the Pi Model B, covering the basic steps for setting up the computer, as well as basic post-installation tasks those first using it might encounter."

Overly Critical Guy writes "Auto makers are launching a universal EV charger that charges an electric vehicle in 15 to 20 minutes. The standard, called Combined Charging System, has been approved by the Society of Automotive Engineers and ACEA, the European association of vehicle manufacturers, as the standard for fast-charging electric vehicles."

bonch writes "Apple has quietly replaced the iPad 2's A5 with a smaller 32nm die that increases battery life by 15 to 30%. It's theorized that Apple is using the iPad 2 as a test bed for the new hardware platform, which shrinks the surface area of the A5 to 57% of the previous size."

MojoKid writes "NVIDIA has lifted the embargo on benchmarks and additional details of their GeForce GTX 690 card today. According to a few folks at NVIDIA, company CEO Jen Hsun Huang told the team to spare no expense and build the best graphics card they possibly could, using all of the tools at their disposal. As a result, in addition to a pair of NVIDIA GK104 GPUs and 4GB of GDDR5 RAM, the GeForce GTX 690 features laser-etched lighting, a magnesium fan housing, a plated aluminum frame, along with a dual vapor chamber cooler with ducted airflow channels and a tuned axial fan. The sum total of all of these design enhancements results in not only NVIDIA's fastest graphics card to date, but also one of its quietest. In the performance benchmarks, NVIDIA's new dual-GPU powerhouse is easily the fastest graphics card money can buy right now, but of course it's also the most expensive." The GeForce GTX 690 has been reviewed lots of different places today, Tom's Hardware and AnandTech to name a few.

An anonymous reader writes "I have at least 10 assorted hard drives ranging from 100 GB to 3 TB, including external drives, IDE desktop drives, laptop drives, etc. What's the best way to setup a home NAS to utilize all this 'excess' space? And could it be set up with redundancy built-in so a single drive failure would cause no data loss? I don't need anything fancy. Visibility to networked Windows PCs is great; ability to streak to Roku / iPad / Toshiba etc would be great but not necessary. What's the best way to accomplish this goal?"

mikejuk writes "Oracle seem to be concerned that the Raspberry Pi manages to run Java properly and they are actively working on the problem. To prove that it more than just works, what better than to get a JavaFX app up and running — what could be more cutting edge? Unfortunately the trick was performed using a commercial version of the JDK with JIT support and some private code, but it is still early days yet. Java and JavaFX on Raspberry Pi takes us into a whole new ball game." Watch the video at the linked report to see it in action.