Want to read Slashdot from your mobile device? Point it at m.slashdot.org and keep reading!

 



Forgot your password?
typodupeerror
×
Hardware

Why Are Laptops Moving to Soldered RAM? (digitaltrends.com) 219

This year Dell moved to soldered RAM for its XPS 14 and 16, writes Digital Trends, which "makes it impossible to upgrade, or even repair."

"This was a big change from the past, where the XPS 15 and 17 were both celebrated for their upgradability." Of course, Dell isn't the first to make the transition. In fact, they're one of the last, which is what makes the decision so much tougher to swallow. Where soldered RAM was previously limited to just MacBooks and ultrabooks, it's now affecting most high-performance laptops for gaming as well. Even the fantastic ROG Zephyrus G14 moved to soldered memory this year.
After two months of research, the article's author acknowledges "there are tangible benefits to companies using soldered RAM, and all the people I spoke to while writing this agree that they outweigh the downsides, but how that applies to the end-user is a bit more complicated." If there's one thing and one thing only that soldered RAM is indisputably good for, it's saving space. [Haval Othman, a senior director of experience engineering at HP] explained the benefits, saying: "If battery life, mobility, form factor (thin and light), and power efficiency are my priority among other design choices, then my mind immediately goes to soldered RAM; because that's where soldered RAM can be beneficial and power-efficient, which will lead to longer battery life. Plus, it's going to give me more space on the motherboard, so I can design the product thinner and lighter. [...] If we want a thin product, the trade-off is soldering more of the devices onto the board."

This tracks. In a laptop, there's only so much space that can be used for components, and that free space grows smaller by the year to make ultrabooks possible. They're an industrywide trend that was first popularized by Apple, and the rest of the laptop manufacturing world quickly caught on. Each year, laptops are released thinner and lighter, and that means having to squeeze the components together in new, innovative ways... Soldering the memory down onto the motherboard means that it can be attached almost anywhere within the laptop instead of being slotted into a specific part of it. It effectively makes the laptop thinner by cutting back on the space that the RAM module takes up. The space saved by soldering memory can be used for other things, such as a bigger battery....

All three companies that I spoke to stress the form factor much more than any tangible cost benefits... Stuart Gill, director of global media relations, campaigns, and corporate content [said] "Both soldered and socketed RAM designs are now quite mature. As a result, we see no impact on the manufacturing process and, therefore, the cost to the consumer."

SO-DIMM chips also have "relatively limited bandwidth," according to HP's Othman, "while when you solder the memory chips onto the board, you can build it for a much wider bandwidth."

But the article ends by looking to the future. "The good news is that SO-DIMM memory might eventually be replaced by the CAMM2 standard." Recently approved by JEDEC, CAMM2 is said to be significantly thinner, and it'll be available both in soldered and non-soldered variants. Using CAMM2 will allow laptops to stack up to 128GB of RAM, and the frequencies are said to be going up, too. CAMM2 can also activate dual-channel memory with just a single module.
This discussion has been archived. No new comments can be posted.

Why Are Laptops Moving to Soldered RAM?

Comments Filter:
  • by gnasher719 ( 869701 ) on Sunday April 28, 2024 @02:21PM (#64431108)
    If soldered RAM can give you lighter and thinner laptop, then it can also give you a laptop with a bigger and heavier battery, so instead of better weight the manufacturer could give you much better battery life.
    • by Dwedit ( 232252 ) on Sunday April 28, 2024 @02:24PM (#64431110) Homepage

      HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA

      *breathes*

      HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA

      That's a good one....

      • by sg_oneill ( 159032 ) on Sunday April 28, 2024 @09:12PM (#64431702)

        It should be lost on no one however that when Apple backtracked a little on that whole "thin at any cost" to actually put a proper magsafecharger, hdmi port and some usbc plugs, sales skyrocketed again.. People actually want a useful device, not just "woah, thats skinny!". Plus, frankly, aesthetically, a slightly fatter laptop is preferable to a slightly thinner one and a whole nest of dongles.

        Unfortunately I dont see a sane path to getting pluggable ram back without backtracking on the main selling point of the 'apple silicon' range, which is to gain performance by putting it all on the same die.

      • by Z00L00K ( 682162 ) on Sunday April 28, 2024 @10:37PM (#64431810) Homepage Journal

        It gives you MORE electronic waste too, I recently had to scrap a perfectly otherwise good computer due to an erratic memory cell causing BSODs.

        If it hadn't had the soldered RAM then I could just have changed the memory module or even just removed it and I'd have a working computer.

        • This really bugs me. My old Macbook 2011 made it nearly a decade partly by me being able to flip on its back, and replace or update parts at will. It was long a machine in decline, as a mangled third party repair had left it so the back case never quite screwed on right again leaving it structurally a little unstable but in the time I had it I upgraded its HDD to a an SSD, upgraded the ram to either 16 or 32gb (Cant remember, might have just been 16), completely replace the wireless daughterboard with one o

    • These days all high performance computing is limited by just one thing: ram bandwidth. And with the tradition to AI on gpu this issue got worse. Apple is the only company that is making integrated gpu/cpu memory that is also high bandwidth. Not like the bad old days where integrated memory just meant cheapo motherboard without dedicated video memory.

      Memory is in fact moving into the system chip for even better bandwidth so of course it has to be soldered! That's not even the right terminology.

      The real qu

    • by Kisai ( 213879 )

      Good gawd, thin laptops are a curse.

      Listen manufacturers. I don't want to hear about soldered ram until you figure out how to have a thin and light laptop that has desktop performance without any cooling fans. Because the trade off for "thin" is "loud, hot and short lived"

      • by ceoyoyo ( 59147 )

        Meh. I'd like to have datacentre performance without any cooling fans. And less than three pounds. Thanks.

    • You can put the dram's socket on the edge of the motherboard instead of the top and make the laptop just as thin as before. And the difference in power efficiency might be as much as a minute on the battery's charge. Maybe.

      No, the real difference is they can save a dollar, maybe not even that much, by soldering the ram instead of socketing it. If they can convince you that the soldered laptop is as valuable as the socketed one, that's a dollar's competitive advantage.

      • by torkus ( 1133985 ) on Sunday April 28, 2024 @10:13PM (#64431778)

        It's not so much the dollar difference in BOM, it's the fact they can force you to buy the memory upgrade at the arbitrary price set by the mfg.

        If onboard memory is cheaper, why is every memory upgrade for soldered-on RAM more expensive than the discreet DIMM cost at retail? It's a sales scam, nothing more, nothing less. The saved space argument is dumb and, with CAMM2, outdated anyway.

  • by drnb ( 2434720 ) on Sunday April 28, 2024 @02:28PM (#64431118)
    Besides cost, size, cooling, and providing access; its probably the fact that almost no one upgrades beyond build to order configuration.

    Yeah, yeah, you upgrade with 3rd party RAM - it still adds up to almost no one overall.
    • by ls671 ( 1122017 )

      I also hear soldered RAM make everything faster since you can then skip some interfaces for memory access and not bother about supporting many RAM chips.

      • I also hear soldered RAM make everything faster since you can then skip some interfaces for memory access and not bother about supporting many RAM chips.

        Wonder how “fast” it is to replace that skip-some-interfaces memory module when it goes bad?

        Speed is relative when you’re staring at a brick on a Thursday afternoon, with the big sales pitch due Friday morning.

        Even the layman could fumble their way through a SODIMM replacement in a matter of an hour. Future laptop repairs are looking about as expedient as car repairs.

      • by ceoyoyo ( 59147 ) on Sunday April 28, 2024 @03:00PM (#64431156)

        I'm sure those are also benefits, but it mostly makes things faster because you don't have connectors in the way. Solder joints can be a pain for high speed, low power signals. Actual connectors are much worse, and if those connectors lead to off-board modules that's even worse. And actual connectors that are accessible without disassembling everything (i.e. the traces are likely even longer) worse yet.

        First reply here has more detail:
        https://electronics.stackexcha... [stackexchange.com]

        • by AmiMoJo ( 196126 )

          Indeed, it's the laws of physics getting in the way now. At the speed RAM operates at, the wire connecting every bit to the CPU has to be exactly the same length as all the other ones, or the bits arrive out of sync and get confused with the next read/write. That's why PCIe switched to using multiple serial lanes, all independent so that bits can arrive at different times without issue, and in fact at the speed it operates there will be multiple bits on the wire between the CPU and the slot at the same time

      • You hear wrong. Except for special purpose cases such as Apple matching selected ram with their CPUs, there's nothing unique about soldered on RAM chips in a laptop, and there's nothing especially fast about them, either configured or benchmarked.

        There is *potential* for it, but it just isn't happening outside of a few edge cases, and we're a long way from maxing out the speed limits of the SODIMM interface.

        • by ls671 ( 1122017 )

          Well, I also hear some CPU now have all their RAM on chip with no external RAM at all, that should be fast enough /s

      • by sjames ( 1099 )

        BIOS spends so much time faffing about and twiddling it's thumbs, the time to bring up the RAM is lost in the noise.

    • It's just years and years later that they do it. In the past that wasn't an issue for the manufacturers because he destroyed most laptops so that they didn't have to worry about the used market. But modern CPUs and gpus are not getting any faster but they are getting cooler so laptops are lasting longer.

      A surefire way to build obsolescence into your product so that you're not losing sales down the road is to solder in ram. This is especially true for Apple devices.

      As an added bonus you can't just buy
      • A surefire way to build obsolescence into your product so that you're not losing sales [to upgraded used systems] down the road is to solder in ram. This is especially true for Apple devices.

        Yes and no. A surefire way to avoid obsolescence is to upgrade RAM at the time of the original purchase, build to order. Basically suppliers are pushing us to upgrade now, not later.

        Also, upgrading at original purchase does not harm the used market, it might actually help it. Fewer flaky systems. How many of those folks who upgraded their own RAM went on to run memtest for 48 hours?

        Personally I've doubled RAM at original purchase in the three Mac laptops I've had these last 20 years. 4 -> 8, 8 -

    • Future ./ headline: "Why Microsoft is locking PCs to only run Windows"
      Future drnb response: "Yeah, yeah, you install linux - it still adds up to almost no one overall."

      Just because you choose to ignore a feature provided to you doesn't mean that others should be denied that choice because of "market forces."
      • by drnb ( 2434720 ) on Sunday April 28, 2024 @04:53PM (#64431362)

        Future ./ headline: "Why Microsoft is locking PCs to only run Windows"
        Future drnb response: "Yeah, yeah, you install linux - it still adds up to almost no one overall."

        A straw man, and rather ill-informed at that. My built from parts PCs have been dual booting Windows and Linux since the 90s. You are just recycling the paranoia circulated when UEFI was first discussed. Linux usage actually grew during the era of signed binaries.

    • This may be true, but the Dell XPS line is mostly preferred by power users, who are much more likely to upgrade than others.

      • by drnb ( 2434720 )

        This may be true, but the Dell XPS line is mostly preferred by power users, who are much more likely to upgrade than others.

        Dell, like Apple, offers build to order upgrades at initial purchase. I doubled my RAM when I had to buy a Dell laptop for school. I'd do the same for an XPS laptop today.

        For desktops I've been building my own from parts since the 90s. But for laptops I'll do the factory upgrade.

  • Retail profits (Score:5, Insightful)

    by Powercntrl ( 458442 ) on Sunday April 28, 2024 @02:30PM (#64431122) Homepage

    Soldered RAM is not being utilized to save costs at the manufacturing stage, it's being done so that consumers have to anticipate their future RAM needs when buying the machine and pay a premium for models with upgraded specs. If you buy the base model, then the profits materialize when you're forced to buy a new machine sooner due to planned obsolescence.

    "Thin and light" is just how companies like Apple have always spun soldered RAM as some kind of benefit, but the reality is they're either gonna hit you up now if you want a machine with a decent amount of RAM, or they'll hit you up tomorrow for a whole new computer. It's insidious, but highly profitable.

    • Re:Retail profits (Score:5, Interesting)

      by echo123 ( 1266692 ) on Sunday April 28, 2024 @02:40PM (#64431128)

      Framework computers have never looked better. I've known about them for awhile. For kicks I just tried their component configurator for the first time, and it's everything I want. The price for added RAM, disk, etc. isn't close to rotten Apple prices for the same parts, and not far off from Amazon ala carte prices.

      https://frame.work/ [frame.work]

      • Framework computers have never looked better. I've known about them for awhile. For kicks I just tried their component configurator for the first time, and it's everything I want. The price for added RAM, disk, etc. isn't close to rotten Apple prices for the same parts, and not far off from Amazon ala carte prices.

        https://frame.work/ [frame.work]

        If I still had mod points you'd have some coming your way. I logged on just to say exactly the same thing about Framework laptops. In fact, I'm saving for one now.

    • Re:Retail profits (Score:5, Insightful)

      by serviscope_minor ( 664417 ) on Sunday April 28, 2024 @02:47PM (#64431130) Journal

      Until, well about now they has been no socketed form factor for LPDDR. SODIMM just doesn't have the electrical spec to slow for it. The impedance of the contacts is too variable for the very low voltages sand high frequencies. This is why the new form factor has a much higher contact pressure. Also it's easier to get consistent trace lengths which helps too.

      This isn't a grand conspiracy, laptops with SODIMM have serious power draw penalties.

    • Dunno, I think the reason Apple likes to sell 8gb machines is because their already finicky SSD wears out faster.

    • by Bert64 ( 520050 )

      The vast majority of users never upgraded laptops in the first place even with removable memory and drives, they would throw it out or at best offload it onto the user market.
      It's more likely that whoever buys a used laptop would have upgraded the memory.

    • This isn't a grand conspiracy, laptops with SODIMM have serious power draw penalties.

      Are those power draw penalties so high that there would be an ROI on the cost of replacing the entire laptop instead of repairing or upgrading? Would the engineers who designed this be shocked to find out that this restricts repairs and upgrades?

      If the answer to those questions is "no", then:

      1. It's a worse deal for the purchaser.
      2. They know it.

      The OP didn't call that a "grand conspiracy." What's with the change up?

    • Re:Retail profits (Score:5, Insightful)

      by thegarbz ( 1787294 ) on Sunday April 28, 2024 @05:09PM (#64431400)

      One man's spin is another man's critical feature. I have never upgraded RAM in a laptop. Never. I've owned plenty of laptops. Never felt the need or desire to. On the other hand I do like laptops that are small, light, or have bigger internal batteries, something that is possible when the main board is made smaller by not wasting space on a connector I won't ever use.

      It may not suit you, but don't pretend just because it doesn't that it is "spin". These are actual features to some of us.

      • Yeah, I'm pretty rough on my laptops. None of them has ever lasted more than 4 years. The upgrade cycle never has a chance to kick in. I definitely prefer longer battery life to upgradeable RAM. Because that battery is the only thing to go which drives me to purchase a replacement every time.

      • Great. Now I dare you to justify soldered-in SSDs.

      • by tlhIngan ( 30335 )

        There are two aspects to it.

        First, RAM slots have traditionally be huge things. It might not seem like much, but in this day and age of super thin laptops (think like the popular MacBook Air or the ThinkPad X1 Carbon series), the RAM slot is simply too big. You might think that's a problem you don't have, but thin laptops are nice to have if you want something to carry easily with you all day. Adding the RAM slot can easily double the thickness.

        Second, I'm sure manufacturers have done the research that few

      • by AmiMoJo ( 196126 )

        Different laptops for different markets. People who buy workstations do appreciate upgrade capacity, things like RAM sockets and NVMe slots. They are usually less concerned about running the RAM at the absolute maximum speed too, as for workstation loads the difference between DDR5 5600 and 6600 is basically zero. ECC is likely to be more important.

    • by sinij ( 911942 )
      For decades I built my own PCs. My current PC is now almost 4 years old and I only updated video card. I don't think there is a case for upgradable PCs anymore.
      • Along the lines of the GP post, the biggest reason I've upgraded RAM and SDD in recent years is because they grossly overcharge for the soldered-in stuff. Kinda like how cars' base MSRP is based on some rock-bottom trim level they don't even sell and then they overcharge for the mandatory 'options.'
  • Not everyone wants thin over everything!

    I own a Dell (switched from Macs) precisely because they could be upgraded. Guess the next laptop won't be a Dell.

    • I switched from Dell to Mac back around 2003 - in part because of OS X, but also because my Inspiron with its power brick felt like I was carrying an extra 20 pounds on my shoulder. My first MacBook Pro, with its relatively tiny power brick, weighed half what the Dell did.

      Of course those Macs were still somewhat user upgradable. I remember some of them made it trivial even to replace the hard drive.

      I'm conflicted. I don't really believe there's a grand conspiracy here, but I did like being able to work on m

      • That's basically because of how small it is. I have a 16" mbp and a 17" lg gram. When the MBP is in my bag, I definitely notice; the thing is a brick. The LG though? Not at all. In addition to the bigger screen, it's also matte so no fucking around with glare.

    • Sounds like they're trying out the concept of soldered-in ram on the XPS, which is a consumer-grade model. If they start trying this bullshit on the business line (Latitude) I suspect corporate IT departments are going to revolt.

    • by Bert64 ( 520050 )

      But not enough to be of interest to the large vendors. For the 1% of users who know how to upgrade memory and actually plan to do so, there are some niche vendors out there.

    • Not everyone wants thin over everything!

      I own a Dell (switched from Macs) precisely because they could be upgraded. Guess the next laptop won't be a Dell.

      Who said thing? In many cases the benefit isn't thin, the benefit is shorter. Shorter motherboards mean more space for larger batteries. Everyone wants larger batteries, even you.

      That said if upgradability is important to you then be selective. There's enough choice on the market for you to be. Just don't pretend that your view is common, the overwhelming majority of people do not upgrade laptop components.

      • They are being selective. You are the one claiming they have no right to complain to the manufacturer as a customer about their decision which may cost them their business.

        There's a difference between you making assumptions about everyone else's desires and them warning the company that their decision may cost them customers / future profit. One is an opinion, the other is a vote.
  • by dgatwood ( 11270 ) on Sunday April 28, 2024 @02:52PM (#64431138) Homepage Journal

    But why do people want a thinner, lighter laptop? The pushback from high-end users against the Retina MacBook Pro was so bad that even Apple has realized that making laptops thinner isn't automatically a good idea.

    Lighter, maybe, but you're not going to make enough weight difference by removing SO-DIMM slots to be noticeable.

    And battery life is almost entirely a red herring. A RAM chip draws the same amount of power to keep it running and refreshed whether it is soldered onto the motherboard or onto a separate SO-DIMM. You do save a tiny bit of power on the memory bus itself by not sending the signals as far, but that tiny savings would be entirely lost in the noise compared with, for example, the power consumed by the CPU itself.

    No, there are really only three reasons:

    • Reliability. Soldered-on RAM won't ever have problems caused by the RAM getting unseated. Realistically, this is a minor concern, though, because that almost never happens in the real world.
    • Memory bus latency. If and only if the soldered-on RAM is closer to the CPU, reduced memory latency could improve performance in some workloads.
    • Disposability. Soldered-on RAM can't ever be upgraded, so when you realize that you need more, you have to buy a new computer instead of being able to upgrade it. Similarly, soldered-on RAM can't be replaced, so if you start getting errors from your RAM, you have to buy a new computer (or at least replace the entire motherboard for a sizable percentage of the cost of a new computer) to fix it.

    Manufacturers love that last one. Why would they want to make it easier for consumers to keep using their products longer? That means they make less money. If consumers are still willing to buy computers with non-upgradeable, non-replaceable RAM, why wouldn't they take maximum advantage of that to earn more revenue?

    The only time I could see it being a real benefit to users is when the RAM is integrated into the CPU, because that could provide significantly lower memory bus latency and maybe higher memory bus speeds. But even that would only really be beneficial for users who frequently do some operation that is impacted significantly by memory latency, and only if the CPU's pipeline is efficient enough to take advantage of the lower latency.

    Otherwise, soldered-on RAM seems like a rather large net negative from my perspective.

    • by godrik ( 1287354 )

      But why do people want a thinner, lighter laptop?

      uh... I do. I am using a dell precision 3480 as my daily laptop. And I find it too big and too heavy.

      Ideally I'd like my laptop to be under 3lbs. Seems like XPS can be at that weight though.

    • The only time I could see it being a real benefit to users is when the RAM is integrated into the CPU, because that could provide significantly lower memory bus latency and maybe higher memory bus speeds. But even that would only really be beneficial for users who frequently do some operation that is impacted significantly by memory latency, and only if the CPU's pipeline is efficient enough to take advantage of the lower latency.

      This doesn't make any sense to me. People keep saying this but the problem in my mind is that the CAS delay takes place over multiple cycles. So how could proximity make THAT much of a difference? If this was SRAM, like what CPU cache is, that would be reasonable. But DRAM? Just doesn't make sense. I'd be curious to see some actual benchmarks.

      In programming this is a common thing I see while optimizing. Some people want to optimize everything, but when you have one function running async that can't finish u

    • by bill_mcgonigle ( 4333 ) * on Sunday April 28, 2024 @03:51PM (#64431244) Homepage Journal

      One more: since you can't upgrade later for $150 you have to pay $450 more up front if you'll ever want more.

      Better to buy no-name OEM from Taiwan at this point than big American brands.

    • by mea_culpa ( 145339 ) on Sunday April 28, 2024 @04:32PM (#64431330)

      It's to make more money on pricing tiers.

      8GB model $999
      16GB model $1299
      32GB model $1599
      64GB model $1999

      You can buy 64GB yourself for around $100, but will have to pay $1000 extra if you want 64GB baked in.

    • Re: (Score:2, Insightful)

      by thegarbz ( 1787294 )

      But why do people want a thinner, lighter laptop?

      Why not. Some of us travel with the things and don't have them sitting on our office desk. I really wish my company would buy an Macbook Air or a Surface, but I'm stuck with a bulky Dell.

      Lighter, maybe, but you're not going to make enough weight difference by removing SO-DIMM slots to be noticeable.

      No. The difference is thickness and total real-estate. You may not want a thin laptop, but I bet you like one with extra battery life. I certainly do, and that could be related to me having just checked in for my flight tomorrow. The board space taken by soldered on RAM is significantly less than that taken by a SODIMM modu

    • Interestingly, I feel the exact opposite about thinner vs lighter. I am strong enough to carry any post 1990s laptop without any hassle. But I do like them to be thin so it fits in bags with all my other shit. Give me a 30 lb laptop that fits in a folder and I'll be fine. As long as it also magically has a good keyboard.

      • by dgatwood ( 11270 )

        Give me a 30 lb laptop that fits in a folder and I'll be fine.

        I'm pretty sure you'll slice your fingers off when you try to pick it up. :-D

  • by ebonum ( 830686 ) on Sunday April 28, 2024 @03:02PM (#64431160)

    I've diagnosed more than one laptop by pulling each RAM stick individually, and the problem suddenly goes away. Amazon overnight a new stick, and, Voilà!, fixed. Cheaply and quickly. Personally, I haven't had good luck with the RAM checker programs.

    Is there any one single component in a laptop more likely to cause problems than bad RAM?

    • Yes

      1 - batteries, they will wear out.
      2 - ssds, not quite as bad as in the mechanical drive days, but they can still wear out.

  • Devil: you have never, in 30 years of laptop ownership, upgraded components or had RAM fail. You like thin and light, as long as performance doesn't suffer. RAM shortage wasn't the reason to change the machine - CPU speed/architecture and display technology improvements were and they really can't easily be upgraded. Last three machines all had the same amount of RAM.

    Angel: but things should be repairable and upgradeable, just because.

    Angel doesn't stand a chance. Maybe some buyers of vintage gear will one d

    • by ratbag ( 65209 )

      Framework, not Foundation, doh.

    • by Sique ( 173459 )
      Since at least five years, all laptops I use are upgrade from lower specs. My parents use a 2011 Macbook Pro, upgraded with SSD and 32 GByte RAM. My wife uses a 2014 Dell Latitude, with RAM, SSD and even the display upgraded to the max.

      So yes, there are people who upgrade their laptops. But we might be a tiny minority. And given the way we use our laptops, we will run into problems in 2034, when ten year old laptops can't be upgraded anymore. At the time, I am close to retiring age. So right now, I don't

  • by wakeboarder ( 2695839 ) on Sunday April 28, 2024 @03:49PM (#64431238)
    Laptop makers are trying to find reasons to make you purchase new hardware, what better way to do this than to undersize hardware?

    I'm fine with putting the fan on the mobo, can the laptop makers be kind and put a socket on the board? It's like an extra dollar, yeah the design costs more time because the routing and timing are harder. If really appreciate it.
  • by GoJays ( 1793832 ) on Sunday April 28, 2024 @03:58PM (#64431260)

    Most of the benefits for using something like soldered RAM are benefits for the business not the consumer. For example, in my experience the first thing you will need to upgrade on a computer is the RAM. If the ability to upgrade is removed, it increases the frequency that a consumer has to buy a new machine from the business which in turn increases profits. Perfectly usable laptops will go to landfill much sooner after an OS upgrade or two demands more memory. "What's that? That 12th Gen i7 is now useless because it only shipped with 8GB of RAM?! Oh that's a shame... but hey, we have a 13th Gen i7 with 16GB of RAM for only $2000 for your convenience.

    If businesses really want to give the consumer better battery life like they always claim. They could easily put in a slightly bigger battery (or gasp, have a hot swappable battery!), or use a more power efficient screen technology, or a better system cooling for example. I think the amount of power saved by using soldered on RAM compared to a dedicated slot is negligible at best compared to the other changes I mentioned.

    Also, can businesses stop with the environmentalist virtue signaling already? With all those stupid marketing campaigns showing how much Apple/Lenovo/Dell care for the planet. If businesses really cared about the environment, they would make their laptops MORE upgradeable, and not less to maximize the useful life of the machine, while minimizing unneeded waste, production and wasting natural resources. Oh, but hey... they are using recycled cardboard now when packaging their laptops... great job.

    • Also, can businesses stop with the environmentalist virtue signaling already? With all those stupid marketing campaigns showing how much Apple/Lenovo/Dell care for the planet. If businesses really cared about the environment, they would make their laptops MORE upgradeable, and not less to maximize the useful life of the machine, while minimizing unneeded waste, production and wasting natural resources. Oh, but hey... they are using recycled cardboard now when packaging their laptops... great job.

      This kind of greenwashing is terrible. It lulls the consumer into a false sense of security that "something is being done" and therefore they don't need to change any aspect of their lifestyle or purchasing habits.

  • It's also the reason why I bought it. That and the 16:10 display. I refuse to buy any trash systems that have soldered RAM/Storage and you should too.
  • TFT and ATS say it all...

    Why Are Laptops Moving to Soldered RAM?

    ... "makes it impossible to upgrade, or even repair."
    [ie: Increases new laptop sales.]

    /thread

  • My last "real" laptop was a Thinkpad T480. It was, at the time, the most upgradeable/serviceable machine on the market. RAM, SSD/HD (if you had the right proprietary adapter for M.2) and WiFi (if you didn't run afoul of Lenovo's BIOS "whitelist" restrictions). I'd have continued to use it if I could have bought reputable replacement batteries at a price in that was in the same ballpark as reasonable.

    Sadly, you cannot. A set of batteries would have cost more than the machine is worth in any configuration.

    So,

  • If there's one thing and one thing only that soldered RAM is indisputably good for, it's saving space.

    If there's one thing and one thing only that soldered RAM is indisputably good for, it's increasing profits.

    First, memory sockets with their gold-plated contacts represent a not-insignificant cost. Second, inserting the RAM into a socket is an added production step, and for cost reasons manufacturers do everything they can to minimize those added steps. Third, when the user can't upgrade RAM, the computer becomes obsolete sooner, so it gets replaced sooner. Fourth, when people buy a model that has more fact

  • To make them disposal and irreparable that's why. It used to be called planned obsolescence but today's more fitting terminology is enshitification.

  • The article talks about Dell moving to soldered RAM to solve weight and size issues. Dell created the CAMM standard in the first place to solve these very issues. They made the standard available.

    But now, after the JEDEC have settled on the CAMM2 standard, Dell are moving to soldered RAM. Seems that there is clearly another reason for the move that Dell just don't want to admit publicly.

    They make more money this way. Soldered RAM is cheaper to manufacture, and when people find that a model isn't upgradeable

  • This tracks. In a laptop, there's only so much space that can be used for components, and that free space grows smaller by the year to make ultrabooks possible. They're an industrywide trend that was first popularized by Apple, and the rest of the laptop manufacturing world quickly caught on. Each year, laptops are released thinner and lighter, and that means having to squeeze the components together in new, innovative ways... Soldering the memory down onto the motherboard means that it can be attached almo

  • My Framework 13 is as thin as a MacBook, while being fully upgradable and repairable, and has ports. Of course the Arm-based Macs have incredible battery life, but only if you want to give up x86. Iâ(TM)d venture that the Arm cpu is more responsible for that than the fact that the RAM is soldered.
  • Do 90% of people give a shit? OK so its not 1995 in which a laptop would cost 2-3 thousand dollars (which back then was the price of some pretty decent used cars) and technology seemed to move so fast you wanted some future proofing for the next OS or web 2.0 or whatever

    no its 2024, in 2023 my 72 year old mother went out and bought her a new laptop it was on clearance cause it was a last years model. Here in Tennessee we have a tax free holiday meant for school supplies but includes computers, so she didn'

The bomb will never go off. I speak as an expert in explosives. -- Admiral William Leahy, U.S. Atomic Bomb Project

Working...