Follow Slashdot blog updates by subscribing to our blog RSS feed

 



Forgot your password?
typodupeerror
×
Software Hardware Linux

Raspbian Linux OS Gets Major Update, Adds Bluetooth Support to Pi 3 (betanews.com) 87

An anonymous reader writes: The Raspberry Pi 3 was launched with built-in chip for Bluetooth and Wi-Fi support, however, software support for Bluetooth was lacking until now. The drivers were there, but today's update to the Raspbian Linux distribution adds much-needed GUI tools to help you establish Bluetooth connections. Another cool addition is a new backup tool. There are other improvements as well including the mouse settings, and the ability to empty the wastebasket through right-clicking as seen below (yes, seriously). There is even a new shutdown dialog, something even casual users should notice.Official blog post here.
This discussion has been archived. No new comments can be posted.

Raspbian Linux OS Gets Major Update, Adds Bluetooth Support to Pi 3

Comments Filter:
  • Right click empty of the wastebasket? And they say innovation is dead!
  • Wrong summary (Score:3, Insightful)

    by Kinwolf ( 945345 ) on Friday May 13, 2016 @02:12PM (#52106605)
    After reading the summary, Raspberry Pi 3 gets no update at all, it's Raspbian OS that gets the update.
    • by 110010001000 ( 697113 ) on Friday May 13, 2016 @02:18PM (#52106663) Homepage Journal
      Well this isn't a tech site so most people won't understand the distinction.
      • by Anonymous Coward

        Well this isn't a tech site so most people won't understand the distinction.

        Heâ(TM)s right you know.

      • by sh00z ( 206503 )

        After reading the summary, Raspberry Pi 3 gets no update at all, it's Raspbian OS that gets the update.

        Well this isn't a tech site so most people won't understand the distinction.

        It also doesn't "add Bluetooth support." Support was already there; it just added the capability to make Bluetooth settings in the GUI.

    • by harrkev ( 623093 )

      After reading the summary, Raspberry Pi 3 gets no update at all, it's Raspbian OS that gets the update.

      Uhhhh. The Raspberry Pi 2 did get an update -- it is called the Pi 3. If they update the Pi 3, they will call it the Pi 4.

      The Pi 3 is actually pretty new. I only heard about it in February.

      Do you expect hardware updates every three months?

      • by amiga3D ( 567632 )

        Actually they're supposed to have the new Pi Zero out now. It supposedly has some new feature but I haven't heard what.

        • by harrkev ( 623093 )

          The Pi 0 has been "out" for a while (although supplies are very limited, if you can find one in stock).

          It is essentially the processor on a board that looks kind of like a memory module. It is intended to be embedded into other things. All it has is HDMI, one USB port, and the micro-SD card slot. No networking at all.

          https://thepihut.com/products/... [thepihut.com]

          • The whole shtick with the Pi Zero is that it costs $5. But so few were made that they can only be found for $20, which defeats the purpose.
          • by amiga3D ( 567632 )

            Well it was out but they ran out and haven't made any in a while. Supposedly they added something to it when they restarted production but I don't know what the new feature is.

  • by birukun ( 145245 ) on Friday May 13, 2016 @02:25PM (#52106725)

    Been using Ubuntu Mate with Bluetooth for my keyboard since I got it months ago.

    In other 'news' - Windows 10 can be downloaded for free.......

  • Long explains the refreshingly simplistic "SD Card Copier".

    "Long"?

    Hey, editors, try reading what gets submitted to make sure context has not been lost.

  • The ODROID-C2 seems like a better machine.

    I still want a RTC. I like having computers that can operate without being attached to the internet's apron strings. I once had a near nightmare situation whereas the clock was wrong on a computer that was sync'ing files. Never again.

    I've been wanting a Raspberry Pi class device, but as much as I want one, I don't need one...I think.

    • If your clock is wrong while syncing files, I can only assume that you don't have the NTP daemon running, since you evidently had enough network connectivity to transfer large amounts of data.

      If you're completely off the net, I think there's a GPS add-on that will pull atomic time down from the satellites.

  • Look, I like Rasbian and have run it since my first Raspberry 2+ years ago. But I had unexpected grief with the RPi3 -- I have an RPi2 that was up and running for months (I use a lipstick charger for UPS) and it takes all sorts of USB wifi dongles automagically. So I figure no trouble for the 3.

    WRONG! No end of grief, nevermind the obscure pkg imports to wheezy and BRANCH=next kernel upgrades. Wifi would NOT work. Only when I did a fresh install of jessie was it seamless. This 73 MB apt-get didn't do

    • If you're using the same power supply, make sure it can supply 2.5 amps. The 3 uses more power than the 2.
      • by redelm ( 54142 )
        Yes, power matters. More for the BCM USB/eth[wifi/bt] than the CPU (I had one stable at 3.8V), one reason to prefer the A+ and now Zero unless you need the SMP/RAM.

        I did quite some experimentation to find a lipstick [18650 bat] charger that worked as UPS. Cables also matter--I use short and fat with 0.4ohm loop loss. A cute little LED voltage readout wired to the GPIO shows 4.80V at idle, 4.72 when loaded. But when new software (non-crippleware) fixes a problem, then how can you say it was hardware fault?

        • But when new software (non-crippleware) fixes a problem, then how can you say it was hardware fault?

          With software, a prior version may have put load on the CPU that was optimized away by a better algorithm. I'd try a benchmark with the same code on both 2 and 3, computing pi or something, and see what happens with the power. (They will both throttle the CPU if if it gets too hot, so use a heat sink.)

  • If a wpa_supplicant.conf file is placed into the /boot/ directory, this will be moved to the /etc/wpa_supplicant/ directory the next time the system is booted, overwriting the network settings; this allows a Wifi configuration to be preloaded onto a card from a Windows or other machine that can only see the boot partition.

    For people running Windows, there is no /boot/ directory, it's the root of the microSD card. That would have been useful to state.

    Secondly it's a shame this isn't documented in a file on t

Say "twenty-three-skiddoo" to logout.

Working...