Want to read Slashdot from your mobile device? Point it at m.slashdot.org and keep reading!

 


Forgot your password?
Close
typodupeerror
×
Hardware News Technology Build Entertainment

Lian-Li's Adjustable Motorized Standing Desk Is Also a High-End PC Chassis (hothardware.com) 68

Posted by BeauHD from the two-in-one dept.
MojoKid quotes a report from HotHardware: It looks as though Lian-Li took the term desktop computer a bit too literally with its new DK-04 system, which is literally a desk that doubles as an enclosure for your PC components. The DK-04 has a clean, industrial design and even has an electrically actuated height adjustment system that than can raise the desktop from a height of 30.7 inches to 46 inches at the touch of a button. The desk itself is made out of aluminum, while the desk surface is made of tempered glass so that you can get work done on top of it and admire your PC components at the same time. Speaking of which, the DK-04 supports up to 10 HDD/SDD bays and both micro-ATX and ATX motherboards. And if you're thinking about throwing in some monster graphics cards into the mix, the DK-04 will support cards up to 320mm in length. Cool air is pulled in via four front-mounted 120mm fans and hot air is exhausted via another four 120mm fans that are mounted at the back of the desk. Liquid cooling is also supported.
This discussion has been archived. No new comments can be posted.

Lian-Li's Adjustable Motorized Standing Desk Is Also a High-End PC Chassis More

Lian-Li's Adjustable Motorized Standing Desk Is Also a High-End PC Chassis

Comments Filter:
  • ive been thinking about building something similar for my next build in concept anyway i doubt to the quality it claims

  • Noise Level? (Score:3)

    by crunchy_one ( 1047426 ) on Thursday April 21, 2016 @09:35AM (#51955123)
    With so many big fans, I'm wondering how loud this thing is. Could be it be like working over an old Hoover?

    • Re:Noise Level? (Score:5, Interesting)

      by C3lt ( 3644813 ) on Thursday April 21, 2016 @09:48AM (#51955243)
      Larger fans generally means a quieter system as they can spin at a lower speed to shift the same volume of air.

      • Re:Noise Level? (Score:4, Insightful)

        by OpenSourced ( 323149 ) on Thursday April 21, 2016 @11:40AM (#51956089) Journal

        Anyway, IMO, they have squandered an opportunity of using the whole table as a giant heatsink, and make the whole thing silent. I'm sure the fans will be relatively silent, but I'm also sure that the vibration will be noticeable.

        • Case-as-a-heatsink does exist, but you need a clever system of heat pipes to get the heat from where it is generated (CPU, GPU) to the case. If the motherboard is not an integral part of the package, you need to be even more clever to have adjustablity in the heat pipes to accommodate different CPU, GPU locations. It makes for difficult installs, hard to maintain, and such cases cost at least about $500 over standard case costs. Generally such cases only get used in hostile environments (where the air will

    • Re:Noise Level? (Score:5, Funny)

      by U2xhc2hkb3QgU3Vja3M ( 4212163 ) on Thursday April 21, 2016 @10:33AM (#51955571)

      I HAVE THIS DESK AND IT'S REALLY NOT THAT LOUD!

      This non-essential text is brought to you by the "Don't use so many caps, it's like YELLING" filter.

    • With so many big fans, I'm wondering how loud this thing is.

      Probably dead silent. Big fans can move very slowly and produce the same airflow as a loud fast spinning small fan. Less speed, less buffeting, = less noise, and that's before you get into fancy new fan designs. I've given up on fans smaller than 120mm for the chassis in every PC and even some stereo gear in the house.

      Frankly if you can hear your computer these days you're doing something wrong. Or just showing off like those people with the black label Delta fans in the AMD Athlon error who would pick thos

  • the desk surface is made of tempered glass (Score:5, Funny)

    by Anonymous Coward on Thursday April 21, 2016 @09:39AM (#51955159)

    so that you can get work done on top of it and admire your PC dust at the same time

  • Hipsters (Score:5, Funny)

    by 110010001000 ( 697113 ) on Thursday April 21, 2016 @09:53AM (#51955267) Homepage Journal
    One thing I have noticed is that hipsters love these standing desks. Probably because they can't sit down in their skinny jeans.
    • Wish I had mod points, too funny. Seriously though, I think standing for a few hours out of a work day is probably good for your health. If nothing else it's harder to fall asleep standing up.

      • it's harder to fall asleep standing up.

        Being in my last work hour for the day, I can confidently say that what would be harder is the hit, after literally falling asleep standing up.

      • I would complain to my boss that it's too hard to sleep at the new desk.

  • Assuming they have double doors and you wheel it in on a dolly

  • Lack of leg-room and ergonomics (Score:3)

    by Misagon ( 1135 ) on Thursday April 21, 2016 @10:01AM (#51955335)

    The problem with "PC Desk Cases" of this type with flat tops is that when sitting down there is very limited room for the knees.

    The posture for sitting in front of a desk that is most often recommended for ergonomics experts has the desk surface quite low because the forearms are supposed to be horizontal when using the keyboard, so that your wrists could be straight.

    It is also recommended that the top of the monitor screen is at the same height as your eyes. Most adjustable monitor stands would be in the highest position to reach that. A very large number of monitor stands are still too short and have to stand on something to reach that height.

    I think that a better "PC Desk Case" design would instead be more like a classic desktop case on a regular desk. Or rather, a desk that incorporates a shelf for the monitor to stand on with the PC components in the base of that shelf. Unlike a PC on a desk, it could draw in air from the bottom which would give it better cooling.

    • I was surprised to find out that the most comfortable position for me at a desk for long periods of time is actually with the top of the desk more or less in line with the middle of my sternum. From shoulder to wrist, my arms are almost entirely horizontal.

      No idea of the ergonomics of it, but I seem to be managing to avoid fatigue and feel comfortable, even if I usually have to resort to putting the chair to the lowest level.

    • Yep this desk actually has a very poor ergonomic design. The part where the keyboard and mouse should be as thin as possible so they can be as close to your knees as possible. If you have the keyboard and mouse in the idea ergonomic position most monitors do not sit high enough with their built in stands. The back of this desk is too thick for a monitor mount clamp.

  • Devils advocate (Score:3)

    by fluffernutter ( 1411889 ) on Thursday April 21, 2016 @10:12AM (#51955407)
    I hope the components completely detach from the desk. If you cannot get into all sides it would be inconvenient to say the least. Also, I wonder how many people who can afford this are working on a PC for great lengths of time.

    • I wonder how many people who can afford this are working on a PC for great lengths of time.

      I would expect most people who work on a PC for great lengths of time, to be able to afford $1.5K.

      • Yeah but they're not going to want an inaccessible case. I'm a small time dev and I'm always throwing in memory and drives. I can see it if the vogue today is to just buy a maxed out system from the start. I tend to buy a good base and upgrade. Could work for well payed devs I guess.
      • The people who make money in this economy are the people who still meet face to face with people.

      • Re: (Score:2)

        by tlhIngan ( 30335 )

        I would expect most people who work on a PC for great lengths of time, to be able to afford $1.5K.

        Which isn't all that bad - a decent desk can easily be several hundred bucks, and if it's a motorized sit/stand desk, easily $1K. Yes, you can buy super dirt cheap ones for $400 easily, but you can opt for better quality ones as well.

        All in all, it may be expensive for the /.'er who uses a $10 garage sale card table as their desk, but office furniture, especially decent ones, can cost a fair bit of money. And n

    • Re: (Score:2)

      by Lumpy ( 12016 )

      My audio DAW workstation that is basically a glorified PC with 16 cores and 64gig of ram and SAS drives along with it's audio hardware is $25,000 on it's own. and the desk it is on cost me $4500

      And yes I spend a lot of time at it. $1500 desk/case is chump change.

      • So you are saying in your $25,000 system you would never need to get inside it?

        • Re: (Score:2)

          by Lumpy ( 12016 )

          Not in the past 2 years... nope.. you see I buy it maxed out so I dont have to waste time tinkering. I prefer working over messing with it saving a nickle here and a dime there by spreading out upgrades.

          Next year It's time for the 3 year old SSD drives to get chucked out and new ones installed. So there will be a single day downtime when the box is opened for about 10 minutes and then everything freshly reinstalled.

          • Ok so I guess there is a market for it. Pretty bad for the environment to 'chuck out' working SSDs!

            • If they are 3 years old, they are likely in the 120-240 GB range. Not much use after that amount of time, and easily replaced with all 1TB or larger drives.

              • You can still join them together and make a single large storage space. This is what I was kind of getting at originally.. I cobble things together constantly because I don't believe in throwing out electronics that work. Of course drives that are very old will be around the 20Gb range and a motherboard just doesn't have enough ports for it to be worthwhile and you're wasting electricity at that point, but 120-240Gb drives are still useful to someone. If you're willing to trash things I can see a desk li

                • If you are concerned about the greenness of throwing out working hardware, consider the power usage of what you are looking at. 3 x 240 = 720 GB, but at three times the power usage of a 1 TB SSD, and likely not any better performance. Also, likely, they are already in an array, but are getting too constraining which is why the replacement in the first place.

                  I do agree though in handing the stuff down, if someone can use these drives as boot drives elsewhere, they are still useful, if the data isn't classi

  • Interesting product but with the fans (which may be very noisy, as pointed out by other people) could there be enough airflow to cause uncomfortable situations with individuals that are wearing skirts and dresses?

    • I suppose if you have people walking around behind your desk it's a potential problem, but as most people usually have desks up against a wall or some kind of divider, it's not likely to be a problem. But even if, for the sake of argument, we're in some kind of open floor plan hell, those fans probably don't have enough power to recreate a Marilyn Monroe photograph. You'd probably need a really heavy load just to get them to ruffle clothing at all, and at that point the noise from them would be driving the

  • Remember - the studies show that standing desks may actually incur more, and more serious health problems, much more quickly than sitting - in weeks instead of months or years. We DO know sitting for long periods of time is bad, but as per a previous slashdot story [slashdot.org]. there's no indication standing all day is any better.

    I wrote about this before here too [slashdot.org], but the summary is this: the idea that standing desks provide health benefits is based more on well-intentioned ignore-proof-or-lack-thereof feel-good rati

    • Re: (Score:2)

      by LWATCDR ( 28044 )

      That is why I like the idea of a standing desk and a drafting stool for a chair.
      You can stand a while then sit for a while then stand... All without the complexity of a moving desk.

    • Re: (Score:2)

      by EvilSS ( 557649 )

      I wrote about this before here too [slashdot.org], but the summary is this: the idea that standing desks provide health benefits is based more on well-intentioned ignore-proof-or-lack-thereof feel-good rationalization than the anti-vaxxer movement.

      There is way too much of this when it comes to health and nutrition and it's infuriating. Science is supposed to be based on actual science. Not "well it's pretty obvious this is how it should be so let's just go with that", or jumping on one or two initial study results and not digging deeper until decades later, only to discover that nope, it's not that way, and the new way is worse. Woops, our bad!

    • Standing constantly is bad, sitting constantly is bad, but switching between the two is much more healthy.

  • There's a she said in that somewhere.

    But yeah, the front edge on that thing is too thick - if they'd constrained the PC case part to strictly further back or made a knee hole or something it would be great but as it is it looks horribly non-ergonomic, which given that it's a standing desk seems incredibly ironic.

    But I like the concept overall.

    • Use a keyboard tray? Perhaps they even have one designed for it, though I don't see anything about it on Lian-Li's site.

  • Now every 3 years they can sell an entire new desk PLUS the labor to move it in.

    • I've been using the same computer case since 1999. What makes you think you need to sell a new desk for a PC upgrade?

  • Brings me back to my old HP3000 "desks"

  • horizontal case? (Score:3)

    by ooloorie ( 4394035 ) on Thursday April 21, 2016 @10:46AM (#51955679)

    I'm not sure I see the advantage of this over just putting a horizontal case (maybe even a 1U or 2U enclosure with a 90 degree connector for the graphics card) on top of a regular desk.

    • Re: (Score:2)

      by JustNiz ( 692889 )

      I guess you can stand up if you want. Thats about all I can think of.
      What I mostly see with this is more downsides than just a tower and a regular desk.

  • could have designed that thing. $1500 for a too-thick, awkward access (you have to remove the desk surface to get to it, it looks like? HELL NO!) is crazy talk. Pick up a good standing desk for half the price (or well under half, Autonomous is probably fine, it isn't like they manufacture the functional parts (legs/motors) anyway) and spend more on the guts of the computer. Place on the desk surface (my choice) or get XL cables and place on the floor.

  • With the desk at least 79 cm (30.7") off the ground this desk is only suitable for giants.
    The "average" desk height is 75 cm, and I find that uncomfortably high despite being 1m80 tall.

  • But move the storage in front to the sides so I can have a drawer. That thing is WAY too thick to not have a drawer at least.

    Also, if you could build a pop-up display and keyboard into it so I can go full-on Encom/Tron it would be even better.

Slashdot Top Deals

He has not acquired a fortune; the fortune has acquired him. -- Bion

Close