Slashdot is powered by your submissions, so send in your scoop

 


Forgot your password?
Close
typodupeerror
×
Power Science Technology

Continuous System For Converting Waste Plastics Into Crude Oil 139

Posted by Soulskill from the thar-be-oil-in-them-thar-'fills dept.
rtoz writes: A MIT spinout company aims to end the landfilling of plastic with a cost-effective system that breaks down nonrecycled plastics into oil, while reusing some of the gas it produces to operate. To convert the plastics into oil, this new system first shreds them. The shreds are then entered into a reactor — which runs at about 400 degrees Celsius — where a catalyst helps degrade the plastics' long carbon chains. This produces a vapor that runs through a condenser, where it's made into oil. Much of the system's innovation is in its continuous operation (video). This company aims to produce more refined fuel that recyclers can immediately pump back into their recycling trucks, without the need for oil refineries. Currently, 2 trillion tons of plastic waste is sitting in U.S. landfills, so there is a huge demand for this technology.
This discussion has been archived. No new comments can be posted.

Continuous System For Converting Waste Plastics Into Crude Oil More

Continuous System For Converting Waste Plastics Into Crude Oil

Comments Filter:
  • If this technology is so good like they said, and many companies (or better: governments) adopt such ways of transforming plastic into fuel, we can organize all the World plastic waste in to TWO recycle ways: produce FUEL and recycle PLASTIC. We don't need to transform all the plastic waste into fuel. The industry still needs plastic in their products so with a better equilibrium we can reduce the petroleum extraction (a.k.a.: dependency), try to utilize all the annual plastic waste, and (better) we can con

    • Re: (Score:2, Insightful)

      by Anonymous Coward

      I suspect that it's easier to just make it into oil, even the techically 'recyclable' plastics, due to contamination with dyes and other such things: I suspect making clear or lighter-colored plastics from recycled stuff is hard if not impossible, though dark colors may be easy enough to work with.

      On the other hand, it's probably going to be easier(in terms of cost, energy etc) to just make oil out of all of it which goes into reducing fuel consumption, and use that oil for making new plastic.

      • Or this work:
        http://arc.aiaa.org/doi/pdf/10... [aiaa.org]
        Green Aerospace Fuels from Non-Petroleum Sources (2011)

        http://arc.aiaa.org/doi/pdf/10... [aiaa.org]
        "Aerospace Fuels from Non-Petroleum Sources" (2013)

      • You have an interesting point. If (and only if) the process of making oil from plastic were (1) LESS EXPENSIVE than recycle used plastic into new plastic for the industry AND (2) the oil produced could be used into the plastic industry in a way it could be at least the same cost in comparison with the petroleum-to-plastic traditional industry way, it will be better to just transform all the world plastic waste into oil, and then redirect its final product to (A) fuel for machines and (B) the plastic industr
    • That's not what equilibrium means.
    • If it gets good enough to be worth the effort, we can put it on giant barges and go mine out the Great Atlantic Garbage Patch for plastic, and get that embarrassment to humanity cleaned up.

  • Ocean garbage patches? (Score:4, Interesting)

    by Joe Gillian ( 3683399 ) on Friday June 20, 2014 @02:35PM (#47283719)

    Why even bother with the landfills? There are massive garbage patches floating around in the oceans, the vast majority of which are plastics. If you can get a big enough tanker and implement this system on it, you could probably cut the amount of fuel needed even further - the tanker goes into a garbage patch, melts all the plastic down, keeps the oil, and uses some of it to get back to land. It would probably be more effective than loading fleets of trucks.

    • Re: (Score:1)

      by Anonymous Coward

      This. With modern simple filtering systems, you should be able to filter even the tiny particles out of the water and turn them into oil.

      However, we really need to do both: One set of these devices for breaking down plastic that would otherwise be landfilled(and help pay for garbage collection in the process), and one for ocean recovery.

      • Re: (Score:2)

        by mikael ( 484 )

        The problem is that you also end up filtering out all the other life out of the ocean; amoeba, plankton, larvae stages of fish and crustaceans, which sortof defeats the purpose of trying to filter out the plastic in the first place.

        That's the hard part - finding something that will remove the plastic but not the DNA lifeforms.

        • The OP was talking about specific areas of the ocean where plastic accumulates due to currents, not the entire ocean itself.

          Further, you start with the big stuff and all those critters would fall through the mesh. You could still have a person or two check what comes up and toss the wiggling stuff back into the water, but the amount of life that would be impacted is essentially zero compared to the amount of life which is currently being affected by these islands of plastic or ingestion of all those micro

          • We seem fine filtering out the sea life with our fishing nets. The smaller stuff is actually more robust and quicker to regenerate than the bigger fish stocks we are depleting. Atleast in this case we are doing something constructive over all. So what if a little algae and plankton get sucked up too. It's not like they are an endangered species.

        • There is really not much alive in the atlantic garbage patch, which is where this tech would be best used at sea. (Which, if you've never heard of it, is a place in the Atlantic where a bunch of ocean currents sort of cancel each other out, and makes a place where all sorts of nastiness from all over the world collects, poisoning the area in the process)

          • Re: (Score:2)

            by Gonoff ( 88518 )

            Which, if you've never heard of it, is a place in the Atlantic where a bunch of ocean currents sort of cancel each other out...

            I've not heard of one there but I understand that there is a huge one in the Pacific.

            Now if it became worth money can we expect various countries round there to be rubbleized to make them free to give away all their resources?

            • Which, if you've never heard of it, is a place in the Atlantic where a bunch of ocean currents sort of cancel each other out...

              I've not heard of one there but I understand that there is a huge one in the Pacific.

              The Atlantic one is known as "New Jersey."

    • Re:Ocean garbage patches? (Score:5, Insightful)

      by Troyusrex ( 2446430 ) on Friday June 20, 2014 @02:45PM (#47283831)
      Unfortunately, those ocean garbage patches average four 5 X 5 X 1 mm piece of plastic per cubic meter so while a clean up tanker would be great for the environment it wouldn't collect enough to make a meaningful dent in its own fuel needs.

      • Re:Ocean garbage patches? (Score:5, Interesting)

        by Smidge204 ( 605297 ) on Friday June 20, 2014 @03:03PM (#47283983) Journal

        Plus, you'd scoop up a lot more oceanic plant and animal life trying to extract that plastic material.

        Actually, the critters might be a better fuel source than the plastics...
        =Smidge=

      • Does such tanker have to be fast and/or work day and night? I could imagine one solar- and wind- powered. A fleet of such tankers might clean up the ocean slowly but steady, providing a constant "stream" of plastic fuel.

      • Re:Ocean garbage patches? (Score:5, Insightful)

        by Nutria ( 679911 ) on Friday June 20, 2014 @03:32PM (#47284197)

        100 mm^3 of plastic per m^3 of water doesn't sound much like a garbage patch to me...

      • So we need to develop an ultrabright nuke that will melt all of the particles into a thin film of plastic that can be collected... or allowed to sink to the bottom dragging all aquatic forms of life with it... oh.... I guess not.

    • Re:Ocean garbage patches? (Score:4, Interesting)

      by mlts ( 1038732 ) on Friday June 20, 2014 @02:48PM (#47283857)

      Expanding on that, the US Navy (and I'm sure other nation's ship fleets) have excellent nuclear reactors. Even with current technology, thermal depolymerization wouldn't be that hard to do, especially near the Pacific Gyre with the large amount of floating waste available there. Then said ship either stays put, transferring the recovered crude to another vessel, or returns to harbor with useful resources.

      • The reactor referred to in the article is a chemical reactor, not a nuclear reactor.

        • Yes, we know : ) . The idea is to supply the chemical reactor with heat from the ship's nuclear reactor.

          • A heat source is not the problem here since the stuff is a fuel in itself. I suspect the above poster just wanted to push a nuclear agenda by attaching it to something unrelated, but I could be wrong and they may just be so fixated on a topic that "when you've got a hammer everything is a nail" applies. Maybe we should let "mlts" let us know instead of both of us trying to explain what his mostly unrelated post was about? For all we know it could just be about being able to stay at sea for months at a ti

        • Rapier wit!

          Though, i think he was saying that due to the nuclear reactor on board the ship, they could stay at sea basically indefinitely (or until their crew runs out of food), and also that the nuclear reactor would provide the heat needed for the plastics conversion.

        • Quite! Nuckler Energy is BAD OK.

    • Re: (Score:2, Informative)

      by Anonymous Coward

      The garbage patches aren't really big piles of plastic. They're areas above some theshold of plastic to water but still vastly more water than plastic. You'd have to develop something to suck in water and filter out the plastic before you could even start on converting it.

      • I developed a system that sucks in water and filters out dolphins a few minutes after the BP spill in the gulf.

        • A net?

          • "A net?"

            Yep, a Nautical Environment Transformer.

          • More like a combination between a queen excluder and an inclined plane, so the dolphins would be rejected out an alternate chute. It didn't matter if some oil and/or water went, too, because it would just get sucked back in.

            Intake was a suck-start trap siphon, a big round opening that was above sea level at the top but dipped down like a J trap, then came up and over and down. Water was pumped in above the down flow, which had open exit to air, but would be blocked by mass of water: the moving water cr

      • Re: (Score:2)

        by dbIII ( 701233 )

        You'd have to develop something to suck in water and filter out the plastic

        Pumps and sieves may be easier than digging in landfill and sieves.

    • This is a better solution than tankers: http://www.theoceancleanup.com... [theoceancleanup.com]

    • Re: (Score:2, Informative)

      by Anonymous Coward

      I think the gold in seawater might be more valuable than the plastic. With gold at 0.000011 ppm in seawater and $42.27 per gram, a cubic meter of seawater contains 1/20 of 1 cent worth of gold. Assuming that the garbage patches have 0.1 ppm plastic and a scrap price of $0.50/pound, a cubic meter of seawater has about 1/100 of 1 cent of plastic.

      In other words, if you're going to be doing all that work to mine the seawater, you'll do better off extracting gold from it than plastic!

      dom

    • Would make a hell of a refueling rig for the Navy or any other ship that wants to perform underway replenishment.

      Would also be the only chance of starting your own society. with Fuel, you can do anything.

    • Why even bother with the landfills? There are massive garbage patches floating around in the oceans, the vast majority of which are plastics. If you can get a big enough tanker and implement this system on it, you could probably cut the amount of fuel needed even further - the tanker goes into a garbage patch, melts all the plastic down, keeps the oil, and uses some of it to get back to land. It would probably be more effective than loading fleets of trucks.

      You are vastly overestimating the density of these patches, probably due to media sensationalism. For example, the "Great Pacific Garbage Patch" [wikipedia.org] has a density of 4 particles per cubic meter of water. These particles are quite small, even microscopic. I know the news stories make it sound like it is just this mass of garbage floating around but that's just not how it is. From the Wikipedia article linked above:

      "and the relatively low density of the plastic debris at, in one scientific study, 5.1 kilogram

  • Oil - Plastic - Back to Oil? (Score:3, Interesting)

    by Irate Engineer ( 2814313 ) on Friday June 20, 2014 @02:35PM (#47283729)

    I don't know how they define "cost effective", but since the plastic mostly came from oil in the first place, any energy expenditure to recover it is a net minus overall.

    For an individual organization that can get a hold of a lot of landfill plastic cheap, this may be a win, but overall it is a fuel source with an energy return on investment (EROI) less than 1.

    We're in trouble if we have to start resorting to this as an energy source. Deep trouble.

    • Re:Oil - Plastic - Back to Oil? (Score:5, Interesting)

      by Lab Rat Jason ( 2495638 ) on Friday June 20, 2014 @02:48PM (#47283855)

      While I totally agree with this, I think it misses the point.

      Assuming that plastic is provided for free (cities or landfills are already pulling plastic out via a separation step) then enough energy can be *recovered* from the plastic to power the recovery process with a net gain. The goal is not energy independence... it's prevention of non-biodegradable items making it into the landfill.

      There was a story a few months ago about an MIT project [inhabitat.com] to float a collector out into the ocean to pick up plastic... maybe these two teams should get together.

    • Re:Oil - Plastic - Back to Oil? (Score:5, Insightful)

      by Ravaldy ( 2621787 ) on Friday June 20, 2014 @02:49PM (#47283863)

      It's not the point. The point is to take a material that does nothing and to make it useful again. There's only so much plastic you can convert back into carpet and other non critical product. If this isn't BS and the result of the transformation is more fuel than what was used then it's a no brainer. The technology will be adopted and improved which will have even bigger ROI.

      Currently we pay to get rid of plastic. This allows making plastic disposal lucrative and that in my books is a positive ROI.

    • I don't know how they define "cost effective", but since the plastic mostly came from oil in the first place, any energy expenditure to recover it is a net minus overall.

      That would certainly be true when cost is compared to the original cost of the petroleum used to produce the plastic. Depending on the current price of oil, it may or may not be true now and in the future.

    • If your goal was to turn oil into oil, then yes it's inefficient.

      If your goal is to turn a waste product into oil, you need only be net efficient on the collection, conversion, and subsequent waste disposal. If it takes $0.80 of investment (collection, processing, distribution, waste cleanup) to produce a $1.00 worth of marketable product, then you've got a commercial venture. If it costs you up to $1.05 to do it, then you have a government contract possibility as you might be able to charge $0.20-$0.25 to

    • We are making the plastic anyway, so the only thing we need to consider the the energy cost of converting it back into oil once we have finished using it.

    • Re: (Score:2)

      by dbIII ( 701233 )

      I don't know how they define "cost effective", but since the plastic mostly came from oil in the first place, any energy expenditure to recover it is a net minus overall.

      While that is undoubtedly true it's likely that the energy is going to come from the waste plastic. Similarly coal fired power stations need to bleed off electricity to run crushers, conveyors, sootblowers etc.

      but overall it is a fuel source with an energy return on investment (EROI) less than 1.

      Yes thermodynamics sucks doesn't it - but it

  • Not exactly green (Score:5, Insightful)

    by Derec01 ( 1668942 ) on Friday June 20, 2014 @02:36PM (#47283735)

    I'm all for eliminating waste, but if the net effect is that we're removing plastic from landfills and emitting it as CO2, that's not terribly different from digging up crude oil and emitting it as CO2.

    Now, I'm sure there's some sort of multiplier here that makes it a bit better - perhaps the plastics are a cleaner source and less energy will be used to process it - but currently this carbon is sequestered in an inert if unattractive form whose dangers are mostly localized.

    • The goal isn't to burn this oil as tribute flames to our inventive manliness. It would replace an equivalent carbon portion of the fuel already burned, so there's no net increase in carbon, just that we would need to pull less out oil of the ground and put less plastic back in. (Okay, that's not quite what happens, oil just gets cheaper if you increase the supply so there is some net increase above the magical unicorn world where everything else stayed the same we would use less oil, but it's not as bad as

    • Re: (Score:1)

      by phorm ( 591458 )

      Depending on how much CO2 the machine creates, you may be coming up neutral or a bit ahead VS current oil extraction methods. After all, the machines that are used in oil-fields also use fuel and give off CO2.

      Basically, you're lowering the need to extract raw/crude oil in favor of manufacturing it from plastic waste. It doesn't really affect your overall oil consumption/pollution - though it might affect pricing - but it does get rid of plastic waste buried in landfills. If they could similarly deal with st

    • I'm all for eliminating waste, but if the net effect is that we're removing plastic from landfills and emitting it as CO2, that's not terribly different from digging up crude oil and emitting it as CO2.

      Now, I'm sure there's some sort of multiplier here that makes it a bit better - perhaps the plastics are a cleaner source and less energy will be used to process it - but currently this carbon is sequestered in an inert if unattractive form whose dangers are mostly localized.

      It is terribly different in that unusable non-biodegradable material is removed, and as we develop new combustion systems and CO2 sequestration techniques, we know (should know) what to do with the CO2 exhaust.

      There are no perfect solutions. Just alternatives, and it is up to us in being sufficiently smart (or at least in not being callously stupid) to string multiple alternatives into acceptable solutions.

    • Birds don't choke on CO2. Seriously while global warming is one problem non biodegradable pollution is another. For society digging up tar sands laying waste to nature is a third. You are potentially trading 2 environmental negatives for one, and depending on the use of energy that one negative could be sequestered.

  • Comment removed (Score:5, Insightful)

    by account_deleted ( 4530225 ) on Friday June 20, 2014 @02:41PM (#47283775)
    Comment removed based on user account deletion

    • Re:to state a few obvious facts not in TFA (Score:4, Informative)

      by rahvin112 ( 446269 ) on Friday June 20, 2014 @03:05PM (#47284007)

      It said in the article that the plastic itself, once converted to fuel is used to fuel the process which is converting the plastic to fuel. In other words they pull off a little of the fuel converted from the plastic to fuel the process going forward. Other than the initial startup energy it should be energy independent.

      Plastic is a nasty waste product (it doesn't biodegrade and it kills living things) that we need to find a way to either reuse or properly destroy. Converting the several trillion tons of plastic waste in US landfills into fuel oil not only saves the space in the landfills it recovers energy from a waste product. It's a good idea if the total economics of the setup are profitable enough to justify hauling it to a disposal site or small enough to build these at landfills. It's a damn good waste reduction technique that will ensure we don't end up with the planet in the movie Wall-E (which was buried in garbage like plastic waste).

    • Re: (Score:2)

      by MobyDisk ( 75490 )

      complete this conversion at a less than or equal cost of energy generated by the oil. The shredder, crucible, and condenser arent powered by the mellow rock stylings of huey lewis and the news.

      Actually, the article claims it does. It specifically says it produces a $100 barrel of oil for $35. The way they word it, it sounds like that $35 includes the energy costs.

    • It's interesting that you mention this. I actually have a relatively green process that I'm working on for extracting energy from waste, and it's primary source of input energy is "Hip to be Square". We do note high turnover in our lab assistants, however.
    • yes but what it does do is that it provides a further use for the plastic besides being discarded into the landfills. better to be used completely rather than just thrown away.

    • A.: complete this conversion at a less than or equal cost of energy generated by the oil. The shredder, crucible, and condenser arent powered by the mellow rock stylings of huey lewis and the news.

      You're right.. It is powered by the Power Of Love.... of money and the environment.

    • complete this conversion at a less than or equal cost of energy generated by the oil

      How do you know this? Do you have access to information that shows it is not like the sewerage treatment that releases far more methane than is requited to power the treatment or are you just making a wild guess based on gut feeling and ignorance?

  • Instead of setting up a complicated process to convert plastic to oil, just burn the stuff, and use the heat to generate electricity.

    • Re: (Score:2)

      by mikael ( 484 )

      Then we end up putting dioxins into the environment. You have to burn the plastic in high-temperature incinerators to prevent that from happening.

  • I didn't RTFA, but this is /. so that's a given. As I recall, plastic is the leftover waste from refining oil. That was one of the reasons it was so revolutionary to begin with. No one knew what to do with all of those tons of leftover sludge created by the refining process. If this process can convert plastic into some kind of useful fuel, I would think it would be more efficient to do so prior to creating the plastic to begin with.

    • Re: (Score:2)

      by Nutria ( 679911 )

      As I recall, plastic is the leftover waste from refining oil.

      You recall wrong. Very, very wrong.

      • Diesel is made from the sludge left over from refining oil... makes you wonder why it costs more than regular doesn't it?

        • Diesel is made from the sludge left over from refining oil... makes you wonder why it costs more than regular doesn't it?

          It didn't used to cost more. My somewhat murky memory was that some portion of the population started to see the popularity of diesel vehicles during the Carter administration, especially since the fuel was so much cheaper. (We had a diesel rabbit... very bad idea for several reason, but I digress...) It seems that shortly after this mild shift in public consciousness, diesel prices started to spike.

        • Re: (Score:2)

          by Nutria ( 679911 )

          Hell, you can (and we do) make any shorter-chain molecule by cracking.

          Diesel oil is a bunch of mid-length chains and rings, which naturally exist in crude oil, and have been used that way for 110 years.

          But since we want more gasoline & diesel oil than is naturally in crude, we crack the high-carbon molecules into the ones that we want more of (and then reform those too small into longer ones), instead of burning it in building boiler rooms, ships and making candles.

          To reiterate, though: the chains that

        • Re: (Score:2)

          by dbIII ( 701233 )

          Diesel is made from the sludge left over from refining oil

          No it's just a heavier mix than petrol/gasoline, easier to make than petrol/gasoline but US refineries don't make a lot of it for some reason. The "sludge" ends up being used for things like making roads and/or gets cracked into lighter stuff.

  • It seems like one of the biggest issues with recycling plastics is all the different types, and each type having a different method to get back into a usable form. I see this as being really useful for breaking down big mixtures of plastic, where it would be too costly to sort them out. I wouldn't even use the oil for fuel, make more plastics! Really, plastics has me more wrried about oil consumption in th elong-run, than the fuel usage itself.

  • 2 trillion tons (Score:4, Interesting)

    by Bob the Super Hamste ( 1152367 ) on Friday June 20, 2014 @03:14PM (#47284083) Homepage
    The statement that there is 2 trillion tons of plastic in land fills got me wondering how much oil actually goes into producing something. From what I can gather a barrel of oil weighs about 300 pounds so if there aren't any other external inputs into making plastics that would mean that about 13 trillion barrels of oil have been turned into plastic. This doesn't seem the least bit right given that under 2 trillion barrels of oil have been extracted and not all of that went into making plastic. So how much oil actually goes into making plastic and how much is other stuff is use?

    This leads me to my next question which is how much of the weight of the plastic is turned into oil? If it is over 1/6 of it then we have the equivalent of more than all presently extracted oil in our land fills already.

    • there ARE other inputs into making plastics than the hydrogen and carbon atoms, for example vinyl has chlorine atoms, PET has oxygen.

      42% of crude oil is used for other things than fuel. From fertilizer to explosives to plastics to lubricants to waxes the list is huge

      • I figured that there were but I have no idea how much hence the question. Even with the number you provided it only makes things worse since the ratio of non to oil inputs for plastic would now be above 14:1 instead of my guessed 6:1 which seems even more doubtful. Also a billion tons of fairly dense rock makes a really fucking big hole in the ground [wikipedia.org] and plastic is much less dense than iron ore plus in land fills there would be lots of other stuff as well.

        • yes that number is nonsense. 300 million tons of plastic are produced a year in the world. also, estimate on percent of crude used to make plastic is 4 to 8 percent

    • Re: (Score:1)

      by Anonymous Coward

      "Currently, 2 trillion tons of plastic waste is sitting in U.S. landfills ..."

      I think that number is too high.

      According to both quoted articles and the EPA [epa.gov], "32 million tons of plastic waste were generated in 2012". 32 million to 2 trillion is a huge jump.

    • In 2012, the United States alone produced roughly 32 million tons of plastic waste

      Operating continuously, the plant can convert up to 10 tons of plastic per day into 60 barrels of oil, with zero toxic emissions.

      So just one years worth of the US's plastic waist could be turned in 192 million barrels unfortunately they can't handle that kind of volume.

      The roughly 21k barrel produced by a facility like this in a year would make a very tiny dent in in the 6.89 billion barrels a year we use http://www.eia.gov/tools/faqs/... [eia.gov]

      • You start with one 10 ton/day reactor. Next quarter you build a 50 ton/day reactor. Then you build a 250 ton/day reactor. Then you build a 1000 ton per day reactor. Once you hit maximum scale that's economical, you reproduce the reactor and work on efficiency. Most petroleum refineries are not one big giant crude oil distillation unit. They're many systems working in parallel. And there's more than one refinery...

  • Old Tech (Pyrolysis), Why it didn't sail (Score:4, Interesting)

    by retroworks ( 652802 ) on Friday June 20, 2014 @03:46PM (#47284285) Homepage Journal

    Pyrolysis for "recycling" plastic waste into oil (or tire waste into oil) has been around since at least the 1990s. The main problems are 2: A) As Irate Engineer states, a polymer is an "added value" and deconstructing polymers back to oil always fails economically when actual recycling to like-polymers is available, and B) as Itzy says, the comparative value of returning it to fuel, vs. leaving it in an Municipal Solid Waste to energy facility and burning it, is small.

    I read TFA and cannot figure out what differentiates this from the pyrolysis "waste investments" of the 1990s, none of which really sailed.

  • let's start thinking of ways to reduce the amount of plastic we produce in the first place. I'm thinking mostly about all of the plastic packaging in our Big Box stores. we really do not need, have not needed in the past, to wrap a hammer in a plastic clam shell. It's not like it will go stale if we just hang it on a hook. If you must package non perishable items (to reduce shrink for instance) put it in a cardboard box. Using our finite petroleum resources to package non perishable items is crazy.

    • let's start thinking of ways to reduce the amount of plastic we produce in the first place. I'm thinking mostly about all of the plastic packaging in our Big Box stores. we really do not need, have not needed in the past, to wrap a hammer in a plastic clam shell.

      You could drastically reduce the amount of plastic which hits the landfill by simply mandating that all bits of plastic used for packaging or in a product must be marked for recycling with a molded, stamped, melted, or otherwise permanent (not printed) mark. All those damned clamshells could be recycled if only they were marked. A handful of them are. It would be more efficient not to make them in the first place, but not marking them is just horribly irresponsible.

  • Why not just put the worlds plastic in a volcano. BAM just solved the worlds plastic problem.

    We could pitch other stuff as-well in volcanoes like cars, electronics & other stuff I'm sure. I don't think anyone will complain about a polluted volcano.

    I asked everyone in the office about this & they agree with me. I'm right.

  • and put all that carbon into the air where it belongs!

    Who comes up with this stuff?

    • Your math is off. If there is demand for 100 barrels of oil for use as fuel, we will pull 100 barrels out of the ground and burn it. If we substitute 10 barrels of oil from recycled plastics, then we only pull 90 barrels of oil out of the ground. In both cases, we still burn the same 100 barrels of oil. The plastic existed already -- the energy required to pull the oil out of the ground and process the constituents into the chemicals pre-cursors for the plastic had already been spent. There's only a sm

      • Your math is off. The cheaper oil is the more we rely on it as an energy source as opposed to less dirty alternatives.

        • oil is not getting cheaper, it's getting more expensive. The only reason the recycling of plastics and depolymerization of biomass is becoming "economical" is that the cost of crude pulled from the ground is exceeding the threshold for processing these other materials.

          • I didn't say oil is getting cheaper. I said it is cheaper, e.g., oil is cheaper with this technology than without it.

  • It's actually fairly cheap to manufacture "plastics" that can be used as raw materials by 3D printers from compostable materials that can be used to grow food if need be.

    We only use plastics that are oil-based because we have lots of cheap material and the sludge from the separator columns on the refineries needs to be used for something. We could easily replace those with vegetable based rotation crops that have oils - in fact major US research universities have the basic patents to do just that (e.g. Univ

  • WTH? As if what we've done isn't enough we now are going to cut up plastic and throw that into the air as well. There are better solutions and they don't involve making things worse.

  • Put this one with practical commercial fusion, economical solar energy, and flying cars. It wasn't that long ago Slashdot was all excited about "anything to oil"... went nowhere, of course.

  • that never seems to quite come into production or actually get anywhere. I keep hoping, but .. sigh ...

    I'll still keep recycling my plastic (and hope they aren't kidding me and just dumping it into the landfill anyway). Even if it ends up being "recycled" into park benches or whatever, it's better than nothing.

Slashdot Top Deals

UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things. -- Doug Gwyn

Close