Want to read Slashdot from your mobile device? Point it at m.slashdot.org and keep reading!

 



Forgot your password?
typodupeerror
×
Displays Science Technology

Turning Soap Film Into a Projector Screen 37

An anonymous reader writes "3 graduate students from University of Tokyo, Carnegie Mellon University, and the University of Tsukuba have developed a colloidal display — a clear projector screen that can control its transparency. Normally soap film will allow light to pass through, but the colloidal display does not. It mixes colloid into the solution and uses ultra sonic speakers to vibrate the surface of the soap film to achieve this. They have created several prototypes, such as 3D planar screen, to show how this technology can be useful."
This discussion has been archived. No new comments can be posted.

Turning Soap Film Into a Projector Screen

Comments Filter:
  • early post (Score:5, Informative)

    by Anonymous Coward on Sunday May 20, 2012 @03:23PM (#40058799)

    is this the first post?

    Here's a video [youtube.com] showing the display in operation and how it works. Pretty neat...

    • When it was showing a projection on a tetrahedron, the whole thing (visual and sound) reminded me of the bridges on The Dig.

  • not very practical currently, but pretty cool.

    would be fine for some artsy projects.

  • by Hentes ( 2461350 ) on Sunday May 20, 2012 @03:41PM (#40058891)

    The problem with soap films is that fluid from their top is slowly flowing to their bottom, causing their top to become thin. As a result, the film bursts in a few minutes. I haven't seen anything on how they plan to make these displays durable.

    • spin it with a slight shake maybe to geek the center thick? or use the frequencies they're using to mix it to evenly distribute it.
    • Re:Gravity (Score:4, Interesting)

      by Doc Ruby ( 173196 ) on Sunday May 20, 2012 @04:47PM (#40059145) Homepage Journal

      The bottom of the film could drain into a line that's pumped back to the top of the film. The device would maintain only the top and bottom edges, while the film would form between them. Since they're projecting ultrasound across the film's surface I expect they could run the hydraulics and ultrasonics there, too.

  • Colloid (Score:5, Insightful)

    by techno-vampire ( 666512 ) on Sunday May 20, 2012 @03:50PM (#40058931) Homepage
    TFS says, in part, "It mixes colloid into the solution..." This is Just Plain Wrong because there is no such thing as "colloid." A colloid [wikipedia.org] is a substance microscopically dispersed evenly throughout another substance. I haven't RTFA (This is Slashdot, after all!) but I'd be willing to bet that TFA says that they add something to the solution to make it into a colloid and that the submitter (and editor) didn't bother to make sure they got it right.
    • by gl4ss ( 559668 )

      well, they're controlling the parts of the liquid which are colloid, mixing(controlling) where the liquid has a colloid(?). so it's not evenly distributed, but it's the same liquid - or there's two liquids of which one is colloid and other is not and they're well, mixed.

      the video has colloid splattered all over it in various places too.

    • You evidently didn't even really read TFWA you quoted, either:

      A colloid is a substance microscopically dispersed evenly throughout another substance.[1]

      A colloidal system consists of two separate phases: a dispersed phase (or internal phase) and a continuous phase (or dispersion medium) in which the colloid is dispersed .

      It's pretty clear that "the colloid" is the dispersed phase, the internal phase, the substance that is microscopically dispersed evenly throughout the continuous phase, the dispersion medi

      • It's just kind of odd to refer to it as "a colloid", as if that term were meaningful prior to the mixing.
        • Especially when, as I pointed out already, TFA doesn't refer to "a colloid," but simply colloid as though it were a specific substance.
        • It's not any more odd to call it that than it is to call water a "solvent" prior to pouring it into a salt to make a solution. These are terms that are meaningful because they describe what is being done. It's necessary to refer to the ingredients in terms of the product, even before they're in the product that makes them ingredients instead of just the "materials" they were before adding them.

    • The researchers are mostly Japanese, and clearly english isn't their first language. The website is readable, but gramatically incorrect. I'm sure that they'll get the final article checked properly, but this is just a little public demonstration so a few minor errors from a second-language speaker are forgivable.
  • Soap Films? (Score:5, Funny)

    by ThePeices ( 635180 ) on Sunday May 20, 2012 @04:09PM (#40059005)

    The major problem with soap films, and one that I cannot see ever being fixed, is the total lack of compelling storyline. There is a reason why soaps have never made it out of daytime TV, and film adaptations would be a guaranteed flop.

    What film studio in their right mind would want to fund a soap film?

    • by popo ( 107611 )

      No, no. You completely misunderstood the post. These are ultrasonic soap films. These are beyond the range of human hearing which may make them acceptable to male audiences.

  • If we could use ultrasound to structure an on-demand horizontal thin film barrier strong enough to resist convective air currents, we might have a really useful energy conservation measure. We could create temporary "drop ceilings" that keep warmed air from rising high above head level to the regular ceiling. The air above the film could be left unconditioned, so a much smaller volume of air would require energy to keep warm. Two films a centimeter apart could very well insulate the boundary. We could do th

    • Think smaller. Airtight seals on holes a few centimeters wide, through which wettened tools (Or tools with hydrophilic coatings) could pass without breaking the seal. Handy indeed for laboratory environments when you might want to poke your instruments at a sample while keeping it within an inert atmosphere or protecting it from dust or microbial contamination.
      • That's interesting. Any scale where the surface tension overcomes gravity is a straightforward application environment.

        But the environment I'm interested in is the mesoscale, human living environments like architecture and vehicles.

    • by c0lo ( 1497653 )

      If we could use ultrasound to structure an on-demand horizontal thin film barrier strong enough to resist convective air currents, we might have a really useful energy conservation measure.

      Just vacuum the room out of any air and there you have it: no convective currents. Then use soap bubbles to insulate the room as you please.

      (ducks)

  • by GrahamCox ( 741991 ) on Sunday May 20, 2012 @06:18PM (#40059601) Homepage
    This sounds very much like how large-screen projectors worked, back in the 1970s.
  • by slew ( 2918 ) on Sunday May 20, 2012 @08:02PM (#40060205)

    From the comments I've read so far, it doesn't sound like people are understanding this technology...

    Not sure if I understand it totally either, but basically, the website seems to talk about a mixutre of 2 colloidal liquids are used to create a semi-transparent membrane where they can use ultrasound to mimic some spatially varying BRDFs (bi-directional reflectance distribution function) effects. If you haven't heard of BRDFs, they are used in 3d computer graphics to simulate realistic lighting of different surface types (light from this angle and observer direction has the surface look a certain color whereas illuminating light from a different angle and observer direction looks a different color typically described as a 4D projected map). This give some images more realistic material look (as opposed to the strange plastic look where no matter how to turn your head or change the lighting angle the same average lambertian lighting model of the object is returned).

    If I read the summary correctly, this device could probably also be used like those holographic stickers or lenticular viewers with projected light (instead of reflected light) allowing for more control in time and space and thus better realism. Unfortunatly, just like holographic sticker sand lenticular viewers, it's probably just a toy device, though maybe someday, the concepts could be scaled to do something less toy-ish...

  • they should really clean up.

  • Didn't mind much whether this was so important a noble distraction in my lunch-time interval on /., but the ad that I was served? "New York Film Academy...Learn Filmmaking and Acting for Film..." Something just bit me in the...in regard to some crapy ai-engine behind serving these ads! Was it brute-force or not? An xxx-recipe would've sounded preferable...

Beware of all enterprises that require new clothes, and not rather a new wearer of clothes. -- Henry David Thoreau

Working...