An anonymous reader writes "A new study by researchers in the Built Environment Research Group at the Illinois Institute of Technology shows that commercially available desktop 3D printers can have substantial emissions of potentially harmful nanosized particles in indoor air. Many desktop 3D printers rely on a process where a thermoplastic feedstock is heated, extruded through a small nozzle, and deposited onto a surface to build 3D objects. Similar processes have been shown to have significant aerosol emissions in other studies using a range of plastic feedstocks, but mostly in industrial environments. In this study, researchers measured ultrafine particle concentrations resulting from a popular commercially available desktop 3D printer using two different plastic feedstocks inside an office. Ultrafine particles (or UFPs) are small, nanosized particles less than 100 nanometers in diameter. Inhalation of UFPs may be important from a health perspective because they deposit efficiently in the lung and can even translocate to the brain. Estimates of emission rates of total UFPs in this study were high, ranging from about 20 billion particles per minute for a 3D printer utilizing a lower temperature polylactic acid (PLA) feedstock to about 200 billion particles per minute for the same type of 3D printer utilizing a higher temperature acrylonitrile butadiene styrene (ABS) feedstock. The emission rates were similar to those measured in previous studies of several other devices and indoor activities, including cooking on a gas or electric stove, burning scented candles, operating laser printers, or even burning a cigarette."
Check out the new SourceForge HTML5 internet speed test! No Flash necessary and runs on all devices. ×
mdsolar writes "Around 2,000 people who have worked at Japan's wrecked Fukushima nuclear plant face a heightened risk of thyroid cancer, its operator said Friday. Tokyo Electric Power (TEPCO) said 1,973 people — around 10 percent of those employed in emergency crews involved in the clean-up since the meltdowns — were believed to have been exposed to enough radiation to cause potential problems. The figure is a 10-fold increase on TEPCO's previous estimate of the number of possible thyroid cancer victims and comes after the utility was told its figures were too conservative. Each worker in this group was exposed to at least 100 millisieverts of radiation, projections show."