An anonymous reader writes "For the first time in eight years, Sony has overtaken Nintendo on the total number of game consoles sold. Sony sold 18.7 million consoles in the last financial year, compared to Nintendo sales of 16.3 million. Sony's PlayStation 4 has emerged as the bestselling 'new-gen' console. But demand for Nintendo's Wii U — with its touchscreen controller — has lagged far behind the original Wii, which was the most popular hardware of the last generation."

An anonymous reader writes in with the story of how MIT's fusion energy experiment is alive and well even though its federal funding was axed. "'In the end, it is about picking a winner and a parochial effort to direct money to MIT,' said Steve Ellis, vice president of Taxpayers for Common Sense, a Washington-based watchdog group. 'It's certainly a case of lawmakers bucking the president and putting their thumb on the scale for a particular project.' MIT enlisted the support of a wealthy Democratic donor from Concord and the help of an influential Washington think-tank co-founded by John Kerry. These efforts were backed by lobbyists, including a former congressman from Massachusetts, with connections to the right lawmakers on the right committees. The cast also included an alliance of universities, industry and national labs, all invested in the fusion dream. 'It's ground-breaking research that could lead an energy revolution,' [Senator Elizabeth] Warren said. 'This was not about politics. This was about good science.' The revival of MIT's project, whatever its merits, clearly demonstrated what the combination of old-fashioned Washington horse-trading and new-fangled power — both nuclear and political — can do."

msm1267 (2804139) writes "If enterprises are indeed moving services off premises and into the cloud, there are four letters those companies' IT organizations should be aware of: IPMI. Short for Intelligent Platform Management Interface, these tiny computers live as an embedded Linux system attached to the motherboards of big servers from vendors such as IBM, Dell and HP. IPMI is used by a Baseboard Management Controller (BMC) to manage Out-of-Band communication, essentially giving admins remote control over servers and devices, including memory, networking capabilities and storage. This is particularly useful for hosting providers and cloud services providers who must manage gear and data in varied locations.

Noted researchers Dan Farmer, creator of the SATAN vulnerability scanner, and HD Moore, creator of Metasploit, have been collaborating on research into the vulnerabilities present in IPMI and BMCs and the picture keeps getting uglier. Last July, Farmer and Moore published some research on the issue based upon work Farmer was doing under a DARPA Cyber Fast Track Grant that uncovered a host of vulnerabilities, and Internet-wide scans for the IPMI protocol conducted by Moore. Farmer released a paper called 'Sold Down the River,' in which he chastises big hardware vendors for ignoring security vulnerabilities and poor configurations that are trivial to find and exploit."

An anonymous reader writes "Researchers from Columbia University's Network Security Lab discovered a flaw affecting millions of Smart TVs supporting the HbbTV standard. The flaw allows a radio-frequency attacker with a low budget to take control over tens of thousands of TVs in a single attack, forcing the TVs to interact with any website on their behalf — Academic paper available online."

Lucas123 writes: 'Scientists developing smart robotic prosthetics say the lines between robots and humans is beginning to blur and that someday soon people will be able to improve their body. For example, robotic prosthetics, using a built-in computer, 100 sensors, and 17 motors, can take natural cues from a user's residual limb, giving him or her the dexterity and grace to play a piano. Robotic exoskeletons have helped people suffering from paralysis walk again and the U.S. military is just weeks away from testing a new exoskeleton. And, more than six years ago, a University of Arizona researcher who had successfully connected a moth's brain to a robot predicted that by 2022 we'll be using "hybrid" computers that run a combination of technology and living organic tissue. "By utilizing technology, you're able to improve your body beyond anything you could do in the past," said Daniel Wilson, an engineer with degrees in machine learning and robotics from Carnegie Mellon University.'

Vigile (99919) writes "Since the introduction of Intel's Ivy Bridge processors there was a subset of users that complained about the company's change of thermal interface material between the die and the heat spreader. With the release of the Core i7-4790K, Intel is moving to a polymer thermal interface material that claims to improve cooling on the Haswell architecture, along with the help of some added capacitors on the back of the CPU. Code named Devil's Canyon, this processor boosts stock clocks by 500 MHz over the i7-4770K all for the same price ($339) and lowers load temperatures as well. Unfortunately, in this first review at PC Perspective, overclocking doesn't appear to be improved much."

jfruh (300774) writes "Blue River Technology built a robot named LettuceBot that uses computer vision to kill unwanted lettuce plants in a field. Rather than build their creation from scratch, they built off of the Robot Operating System, an open source OS that, in the words of one engineer, 'allowed only a few engineers to write an entire system and receive our first check for service in only a few months.' With ROS robots starting to appear everywhere, including the International Space Station, it looks like open source may be making huge strides in this area."

malachiorion writes: "Remember when, about a month ago, Stephen Hawking warned that artificial intelligence could destroy all humans? It wasn't because of some stunning breakthrough in AI or robotics research. It was because the Johnny Depp-starring Transcendence was coming out. Or, more to the point, it's because science fiction's first robots were evil, and even the most brilliant minds can't talk about modern robotics without drawing from SF creation myths. This article on the biggest sci-fi-inspired myths of robotics focuses on R.U.R, Skynet, and the ongoing impact of allowing make-believe villains to pollute our discussion of actual automated systems."

MojoKid (1002251) writes 'Microsoft confirmed a development rumor that's been swirling around its next-generation console ever since it announced Kinect would become an optional add-on rather than a mandatory boat anchor. Lifting that requirement will give game developers 10 percent additional graphics power to play with and help close the gap between the Xbox One and PS4. The story kicked off when Xbox head Phil Spencer tweeted that June's Xbox One dev kit gave devs access to more GPU bandwidth. Further, another Microsoft representative then confirmed that the performance improvement coming in the next version of the Xbox SDK was the result of making Kinect an optional accessory. No matter how Microsoft may try to spin it, cancelling Kinect isn't just a matter of giving game developers freedom, it's a tacit admission that game developers have no significant projects in play that are expected to meaningfully tap Kinect to deliver a great game experience — and they need those GPU cycles back.' Also on the Xbox capabilities front: Reader BogenDorpher (2008682) writes 'In August of last year, a Microsoft spokesman confirmed that the Xbox One controller will be compatible for PC users sometime in 2014. That time has finally come. Windows gamers can now use the Xbox One controller to play games on their computer. If a game supports a USB gamepad or the Xbox 360 controller, it will also support the Xbox One controller.'

Jabrwock (985861) writes 'One of the biggest limitations on lithium battery-powered electric cars has been their range. Last year Israeli-based Phinergy introduced an "aluminum-air" battery. Today, partnering with Alcoa Canada, they announced a demo of the battery, which is charged up at Alcoa's aluminum smelter in Quebec. The plant uses hydro-electric power to charge up the battery, which would then need a tap-water refill every few months, and a swap (ideally at a local dealership) every 3,000km, since it cannot be recharged as simply as Lithium. The battery is meant to boost the range of standard electric cars, which would still use the Lithium batteries for short-range trips. The battery would add about 100 kg to an existing Tesla car's battery weight.'

Nerval's Lobster writes: 'Following up on news that ActiveLink is building heavy-duty exoskeletons for work in nuclear plants, IEEE Spectrum reports that MIT researchers are experimenting with Supernumerary Robotic Limbs (SRLs) that attach to either the shoulder or waist. The SRLs are capable of lifting objects and bracing against solid surfaces. From the article: "The SRL watches what you're doing with your arms to decide how to move. It does that by monitoring two inertial measurement units (IMUs) that the user wears on the wrists. A third IMU sits at the base of the robot's shoulder mount, to track the overall orientation and motion of the SRL." In the future, we will all have the ability to become Doctor Octopus (minus two robo-limbs, of course).'

The Fuel 3-D website has a blurb that says, "The world’s first handheld point-and-shoot, full color 3D scanner. Our planned list price is $1500 but by placing your advanced order now you pay only $1,250. Fire up your creativity!" We've thought about getting a 3-D scanner ever since we first messed with a 3-D printer, but we've thought more about something in the sub-$300 price range than in $1000+ territory. But that's just us. There is no doubt a healthy market for 3-D scanners to use in commercial applications where $1250 (or even $1500) is hardly worth noticing. Ah, well. Maybe we need to look at the The DAVID website which describes their device as an "Incredibly Low-Cost 3D Scanner for Everyone!" Their 3-D starter kit is only $529 from a randomly-selected U.S. reseller, which isn't too bad compared to the alternatives. But waiting for prices in this market niche to come down is another possibility, and it's one a whole lot of individuals -- including us -- and smaller companies will probably choose. (Alternate Video Link)

Hallie Siegel writes: "The European Commission and 180 companies and research organizations (under the umbrella of euRobotics) have launched the world's largest civilian research and innovation program in robotics. Covering manufacturing, agriculture, health, transport, civil security and households, the initiative – called SPARC – is the E.U.'s industrial policy effort to strengthen Europe's position in the global robotics market (€60 billion a year by 2020). This initiative is expected to create over 240,000 jobs in Europe, and increase Europe's share of the global market to 42% (a boost of €4 billion per year). The European Commission will invest €700 million and euRobotics will invest €2.1 billion."

This is something that caught Tim Lord's eye as he cruised the 2014 Bay Area Maker Faire: A 360 4K-resolution video camera. It's not out yet for retail sale, but if you look at the Centrcam website you can see a number of videos their cameras have shot, including some high-motion ones that they say, truthfully, are excellent to watch full-screen. The people who came up with this aren't college students who have never done any professional design work. Rather, they're "the same team that engineered and built the Apple iPhone cameras." So it's no wonder they have made something pretty cool that has already been used to make videos for Fox Sports, National Geographic, and the U.S. Army, among others. Their Kickstarter blurb is pretty cool, too. It is one of the most detailed ones we've ever seen. It's sad that they only got $607,628 of their $900,000 funding goal, considering all the work they've put into their product, along with the great presentation. They didn't know this would happen at the time this video was shot at the Maker Faire; their Kickstarter time window didn't close until four days ago. But there are other ways to fund a startup, and we hope they manage find one -- because we would eventually like to get our hands on one of their cameras and test it for ourselves, possibly with a little help from some of the Bradenton Riverwalk Skatepark regulars. (Alternate Video Link)

MojoKid (1002251) writes "Last year, Intel launched two new processor families based on the Haswell and Ivy Bridge-E based Core i7 architecture. Both chips were just incremental updates over their predecessors. Haswell may have delivered impressive gains in mobile, but it failed to impress on the desktop where it was only slightly faster than the chip it replaced. Enthusiasts weren't terribly excited about either core but Intel is hoping its new Devil's Canyon CPU, which launches today, will change that. The new chip is the Core i7-4790K and it packs several new features that should appeal to the enthusiast and overclocking markets. First, Intel has changed the thermal interface material from the paste it used in the last generation over to a new Next Generation Polymer Thermal Interface Material, or as Intel calls it, "NGPTIM." Moving Haswell's voltage regulator on-die proved to be a significant problem for overclockers since it caused dramatic heat buildup that was only exacerbated by higher clock speeds. Overclockers reported that removing Haswell's lid could boost clock speeds by several hundred MHz. The other tweak to the Haswell core is a great many additional capacitors, which have been integrated to smooth power delivery at higher currents. This new chip gives Haswell a nice lift. If the overclocking headroom delivers on top of that, enthusiasts might be able to hit 4.7-4.8GHz on standard cooling."

An anonymous reader writes "The last time we saw Valve's prototype VR headset, which they said was built to the spec that could be found in a consumer product by 2015, it was a using an 'inside-out' tracking approach where a camera mounted on the VR headset tracked markers placed all over the walls and ceiling of the demo room. This week, at a VR meetup in Boston, Valve had a new prototype to show, featuring an 'outside-in' tracking approaching where a single camera trackings IR-LEDs built into the case of the VR headset, much like the forthcoming Oculus Rift DK2. Valve's latest prototype is thought to be using two 1080p displays in portrait orientation, compared to a single 1080p display in the Oculus Rift DK2."

MojoKid (1002251) writes "Crucial has been on a tear as of late. In the last few weeks alone, the company has released a couple of new series of solid state drives, one targeting the enthusiast segment (the M550) and the other targeting data centers (the M500DC). Today, Crucial is at it again with the launch of the brand new MX100 series. The Crucial MX100 series of solid state drives is somewhat similar to the M550 in that they both use the same Marvell controller. The MX100, however, is outfitted with more affordable 16nm NAND flash, and as such, the drives are priced aggressively at about .43 per GiB. However, these MX100 series of drives are still rated for 550MB/s sequential reads with 500MB/s (512GB), 330MB/s (256GB), or 150MB/s (128GB) and random read and write IOPS of 90K – 80K and 85K – 40K, respectively. The drives carry a 3-year warranty and are rated for 72TB total bytes written (TBW), which equates to 40GB written per day for 5 years. Performance-wise, these new lower cost SSDs, are on par with some of the fastest SSDs currently on the market but starting at $79.99 for the 128GB drive, they're relatively rather cheap."

An anonymous reader writes "Nick Pitton, the developer behind the Spirited Away Boiler Room VR experience, has released his second project: the bus stop scene from Studio Ghibli's famous movie My Neighbor Totoro, once again in virtual reality for the Oculus Rift. Pittom 'hand-painted' the textures in Photoshop to recreated the painted-background feel of the movie. For the characters (Totoro and the Catbus) he used a cel-shaded approached to approximate the animated look from the movie. For his next project, he plans to recreate the ship and characters from the acclaimed anime Cowboy Bebop."

TechCrunch is among the many outlets which carry news (based on a release from MIT professor Daniela Rus) of robots that take advantage of materials engineered to change shape with the application of heat. With carefully planned creases and slits "printed" into flat sheets of plastic, heat-induced deformation can be channeled to create complex three-dimentional shapes, something between origami and Shrinky-Dinks. The creases can also be used to create moving parts in the finished product, and -- as with papercraft -- folding, overlapping and other techniques can increase the stiffness or otherwise give useful properties to the robot bodies formed. From the article: "This project could also produce a variable resistor by opening or closing an electric component and even create metallic muscles that contract when heated or current is applied. It’s obviously still in very early stages right now but Rus and her team will exhibit the technology at the IEEE International Conference on Robotics and Automation this year and maybe, one day, our cake-like robotic servants will rise up and bake us."

New submitter janvlug (3677453) writes "[As of Saturday, May 31], the OpenPandora case and hardware design files have been released for non-commercial use. The OpenPandora is a hand held Linux computer with gaming controls, but essentially it is an all-purpose computer. The OpenPandora offers the greatest possible degree of software freedom to a vibrant community of users and developers."