Abit To Bow Out of Mainboard Market 97
Steve Kerrison writes "Taiwanese technology firm Abit will be pulling out of the mainboard market at the end of this year. HEXUS.channel, citing sources close to South East Asian distributors, reports that the company will continue to deliver mainboard products until the end of 2008 and will still honour all warranties in subsequent years. Rumours of this decision circulated in May but were dismissed. Apparently the decision was made in the last couple of weeks. Abit is a popular brand amongst PC hardware enthusiasts, many of whom will be disappointed to see it leave the market."
RIP (Score:4, Interesting)
Still using mine (Score:2)
Home server for my folks. Works great. Was way ahead of its time.
Re: (Score:2)
Ah, the BP6.
One of the funnest computers I built for myself. Had my 366's OC'd to 602 for years, with a Matrox G400 for dual monitors, and a separate Promise card for a RAID setup.
Was great having a home computer that had twice the CPU, Monitor, RAM and Hard Drive that most people had at the time (and still nowadays, even)
Ran like a champ.
All for less then most people paid for a single 500MHz box at the time.
And for certain tasks, it still feels faster then a 1.xGHz Celeron box I had to deal with recently,
RIP - Perhaps Fatal1ty (Score:2)
http://www.uabit.com/index.php?option=com_content&task=view&id=32&Itemid=48&page=2&model=338 [uabit.com]
Re: (Score:1)
No need to fire up the BP6 as it has been running more or less non-stop since I bought it in 1999. First as a workstation, later - and still - as a server. In tandem with a Webplayer [wikipedia.org] it serves all our needs. Eventually I will replace it with something smaller and less power-hungry but for now it seems content serving our net from underneath the stairs...
The won't be missed. (Score:2)
The assholes at Abit had to be sued to fix the motherboards where they used capacitors made with a stolen formula.
http://forums.cnet.com/5208-7591_102-0.html?forumID=26&threadID=59483&messageID=706271 [cnet.com]
Re:RIP (Score:4, Interesting)
Mine ran dual 300 Celerons overclocked to 504 MHz for *years* with only the slightest of hitches: at power on after being off for a few hours, I'd have to hold the power button in for 4 seconds to turn it off, then immediately hit the power again. It would run indefinitely after that.
That was truly an amazing product for several reasons. First, Celerons weren't supposed to run in an MP configuration. Second, the main engineer for that board, who went by the Westernized name of "Rocky", was 18 years old when he did the work. Third, understand that at this time the fastest PII processors were 450 MHz. Essentially the machine in question was the first gigahertz (504 x 2) box that I'd ever seen.
Re: (Score:2)
Capacitors (Score:4, Insightful)
Abit was the only brand of motherboards I knew of that acknowledged the capacitors problem and claimed to use 100% known-good Japanese caps in their boards. With them gone, does that leave any good companies, or will all motherboards still be doomed to leaky budging and exploding capacitors?
Re: (Score:2)
Wow, didn't see you post that before my tirade, but, when it comes to bad caps, Abit is just as guilty as anyone else. I have the boards to prove it.
Re: (Score:2)
and you can send them in and they will replace them .. either the whole board or the caps..
Re: (Score:2)
They refused to fix or replace my KT7 back in the day after too many caps had finally blown.
Re: (Score:3, Insightful)
i'm very supprised.. all of the boards we had with bad caps they replaced with no questions.
at first they didn't but after about 2 months of them being out and they made the public acknowlagement - they replaced them
Re: (Score:3, Informative)
Yeah, Abit *was* just as guilty, when the problem was first noticed, but they admitted there was a problem, and took a stance of Japanese-only caps later on. Newer boards from Asus and Epox have STILL had bad caps as recently as a year ago, while Abit boards no longer have any problems. This is from my limited experience with all my relatives and friends that I buy parts for and/or fix computers for.
Re: (Score:1)
Re: (Score:1)
"my BIOS splash reminds me daily"
Holy christ, you're a Windows 9x user!
Re: (Score:2)
I hardly think this a problem any more.
My MSI K9N neo has all solid caps, and thankfully it seems many boards are going this way, filtering in from the high end down.
Re: (Score:1)
Abit was the only brand of motherboards I knew of that acknowledged the capacitors problem and claimed to use 100% known-good Japanese caps in their boards. With them gone, does that leave any good companies, or will all motherboards still be doomed to leaky budging and exploding capacitors?
Can you please explain when this started happening? Cause unless this is a recent development, and if you would like to pay shipping, I can offer you a motherboard that says otherwise.
Re: (Score:2)
Indeed, I'm intrigued also as I've yet to have any problem with capacitors on my various motherboards through the ages.
I know at work there was a dodgy batch of MSI motherboards with capacitors that blew but it was literally just a single batch.
Re: (Score:1)
Read around the thread; They've admitted liability. Get in touch with them and tell them your caps have started leaking. They should sort you out.
Re: (Score:2)
Giga-Byte
Re: (Score:2)
Re: (Score:2)
I was a big Abit fan until I had to return a faulty motherboard to NewEgg. Purchasing items online leaves no tolerance for that sort of thing.
Ever since then, I've only bought Asus boards, and I've been completely satisfied.
Re: (Score:2)
I was a big Abit fan until I had to return a faulty motherboard to NewEgg. Purchasing items online leaves no tolerance for that sort of thing.
Uhh, components fail. Having one failure is hardly a statistically significant sample. It could have been Asus, it could have been Intel, it could have been anyone.
Re: (Score:2)
I have a zero tolerance policy.
Anyway, a lot of other people had the same problem with that board.
Re: (Score:2)
I have a zero tolerance policy.
And that makes no sense as it does not take into account how hardware fails and plain old statistics.
Re: (Score:2)
So if I buy a product that sucks, I'm supposed to say, "Well gee, this could have happened to any company. I will give them a second chance."
Companies aren't all that compassionate, why should consumers be?
Re: (Score:2)
So if I buy a product that sucks, I'm supposed to say, "Well gee, this could have happened to any company. I will give them a second chance."
"Sucks" is a very subjective term. There's a difference between you making a subjective decision that "this product isn't for me" and saying under the guise of objectivity that "this product failed so it must suck."
Re: (Score:2)
Well, shit, I give up!
I'll continue on doing what works for me. Maybe you should buy two items from every vendor that sells me one faulty one, just to even out this grave injustice.
Re: (Score:2)
Dodgy manufacturers shift support responsibility onto retailers, but when those retailers are horrible (not newegg, thank the godz), they refuse to pony up and support you.
Promise... now you are amazing, yes, I had to give you my credit card number before you'd cross-ship the warranty replacement, but you did, and it only cost me shipping.
ECS, you morons left me with no alt
Re: (Score:2)
Receiving a bad part is good evidence of a faulty manufacturing process around the time of purchase, but maybe they had improved after that? Even great manufacturers go through bad patches : IBM (disks), Sony, Apple, etc. Usually the situation corrects itself or the company doesn't stay in business.
Re: (Score:1)
Gigabyte uses sold-state Japanese caps on a lot of its motherboards.
They work well with linux, and have got a lot of overclocking options (for those of you into that sort of stuff). With Asus seemingly moving towards actual computers (their latest boards are lackluster compared to the gigabyte ones, sort of like nvidia chipsets) Gigabyte is filling their void.
(not a shill, just satisfied gigabyte customer)
Re: (Score:3, Informative)
Many of the motherboard makers including Gigibyte and Asus have switched to using OSCON style solid electrolytic capacitors which do not suffer from the same problems that normal aluminum electrolytic capacitors do. While they like to brag about how noble this makes them, I suspect the real reason is that it just became more economical because of the increasingly stringent requirements for the processor's voltage regulator. In designs where the capacitors' equivalent series inductance and resistance have
No so disappointed... (Score:1, Redundant)
As I was when my KG7 and KT7 both quit last month with bad caps. To heck with ABIT!
Re: (Score:1, Redundant)
Hey mods! This was post number two! Redundant? You're a bunch of dumb fcks!
Re: (Score:2)
//Post calling mods a bunch of dumb fcks modded redundant... Priceless!
Couldn't resist. (Score:1)
Price jump on the way? (Score:1)
Given the generally good quality of Abit main/motherboards, and the fact that they were reasonably priced: will the loss of their competition raise the price of their competitors? Or is the market broad enough this won't impact the price points? (I would place them in the same field as Asus / ASrock / MSI / BIOSTAR / Foxconn / etc.)
Either way. It is a loss.
Re: (Score:1)
My experiences of abit boards are nothing less of horrible. For example the AB9 Pro motherboard's bios didn't use ACHI or left a whole sata-controller uninitialized depending on the version.
So good riddance, where can I get my lost hair back?
Computers are like TVs now. (Score:5, Informative)
It looks like the margins have become too tight for all but the largest mainboard makers to survive, with massive companies like Foxconn able to exploit extreme economies of scale.
Which is exactly what the TV industry went through. Even the big players left and licensed their names to Chinese companies. Do you really think the Sony TV is really a Sony? Or RCA or GE .... It's just a commodity.
The margins are just too low to even bother with them.
Re: (Score:1)
Do you really think the Sony TV is really a Sony? Or RCA or GE ....
I did! Citation? URL?
Re: (Score:2)
Re: (Score:2)
You do know that there is still a motherboard in notebooks right? It is different but it is still there.
Re: (Score:2)
Motherboards will be things of the past.
Re: (Score:2)
Sony doesn't license their name out, though they do have other companies make many of their products and components for them, then Sony sells those products under their own name. I think Toshiba rebadges someone else's TV with their branding for at least some models.
Westinghouse is another one of those names that was licensed to some other company to make TVs and computer monitors.
Conspiracy? (Score:1)
Sad to see them go (Score:1)
Re: (Score:1)
Re: (Score:2)
Re: (Score:1)
Re:Sad to see them go - ABIT IC7-MAX3 (Score:1)
Re: (Score:1)
Re: (Score:1)
Re: (Score:2)
you're on crack. IN9 32X-Max board was a dismal failure in terms of product quality and actual function. Certain high level Abit officials have already made comments suggesting that they knew the boards didn't work when they sold them. Abit RMA'd most of their production runs from that model. Though most of the blame lays on nvidia for a crappy chipset and faulty memory controller design, the real blame lays on the company who wrote the BIOS software and the company who sold it to me.
Re: (Score:2)
I can't cite, it was a conversation I had with one of them. Not allowed to let that cat out of the bag.
Re:Sad to see them go (XKCD obliq) (Score:1)
Re: (Score:1)
ABit BH-6 + Celeron 300A = full of Win (Score:2)
I remember getting the Abit BH-6 and the Celeron 300A which easily took to overclocking @ 450mhz.
Most stable, rock solid board I've ever owned.
RIP.
Re: (Score:2)
I had one of the first ABIT soft-set motherboards (I put an AMD K6-200 in there to give you the vintage) - to be honest it was a piece of crap. It frequently forgot the settings and forced you to go into the bios.
I got it replaced because it died one day, and the one that replaced it wasn't much better.
Sadly - last abit board I ever had.
Re: (Score:2)
I had one of those and it was wonderful. It was really cool to have more-or-less the fastest computer that any of us had ever seen back in high school, to impress all of my other nerd friends. I was even able to overclock it to 504mhz for a bit, but it was a little unstable.
Re: (Score:1, Redundant)
Re: (Score:1)
Considering VIA is one of the top makers of boards for very small form factor PC's and mobile electronics that makes no sense.
Plus you can completely gut and upgrade a desktop for $300 that will blow an $800 laptop out of the water.
Re: (Score:2)
ABIT... Not sad to see them go (Score:1, Redundant)
All ABIT motherboards I have ever owned had bad capacitors even though they claimed they didn't. I have owned the KT7E with the AMD Athlon XP 160++ and it ran OK for the first year and then ever since it couldn't run for more than a few days without becoming fubared. I then looked over the motherboard carefully and noticed the capacitors were going bad, so I went and got myself an NF7 nForce2 MB w/ an AMD Athlon XP 1700+ and didn't even think about RMA'ing since I figured at the time the KT7E was pretty muc
Re: (Score:1)
I got myself an ASUS Maximus Extreme board with a Q6600, 2GB (2x1GB sticks) RAM, and a GeForce 8600 GTS 256MB GDDR3 PCI-E x16 card, and I have been enjoying it ever since, but it hasn't been a year or two yet so I cannot vouch for how long lasting it is. :)
I've most likely built 20-30 computers and have always used ASUS boards. My mom has one of the systems I built in 2001 with a A7V266 board which is still running strong with no issues. My current M2N32-SLI has survived a catastrophic PSU failure and all the other various things I subject my PCs to. I'll vouch they are long lasting.
Re: (Score:1)
well I'm still using an Abit NF7-S v2.0 board at home.. have been since buying it used in 2003.
It is occasionally flaky every couple months I will have to screw around with it a little to get it to post, but getting 5 years out of it I've been pretty happy with it.
Seems quick enough, and some people will know the NVidia Nforce 2 Ultra's South bridge contains a quite decent onboard sound chip, similar to the XBOX (v1) sound chip, the NVidia SoundStorm...
That's all for now
At least some closure (Score:2)
Then again, with board manufacturers all over the place (Palit, Zotac, Asus, Intel, Foxconn, ECS *shudder*, Gigabyte
Their terminology dooms them (Score:1, Troll)
Anyone who calls a motherboard a 'mainboard' deserves to fail.
Re: (Score:1)
Anyone who calls a motherboard a 'mainboard' deserves to fail.
To call it a mainboard is the PC way (yes it's a pun). Or would you rather have Fathers for Justice coming after you for being gender-biased? Wouldn't fatherboards be able to take care of all those electronics too?
BTW, why are all CPU's heterosexual males anyway? They always mate with female sockets.
Re: (Score:1)
You say motherboard / daughterboard. I guess fatherboard / sonboard just doesn't have the same ring to it.
Compare mother cell / daughter cell in biology.
IBM always used to call it a 'planar' which at least sounds suitably nerdy.
Re: (Score:1)
Re: (Score:1)
Thank goodness! Emancipation at last. It probably shows my age and lack of finances that I'm still using a Socket 478 mainboard/CPU from before the sexual revolution.
Abit was still making mobos? (Score:2)
Abit is a popular brand amongst PC hardware enthusiasts, many of who will be disappointed to see it leave the market.
In the late 90s and early 00s maybe. They've been more of a problem-child as of late. Frankly, I thought they were already out of the market.
Re: (Score:1, Informative)
The old Abit died a couple years ago. The current Universal Abit [wikipedia.org] company has sucked since then.
Hmm.. (Score:1)
Impossible (Score:1, Redundant)
I just bought a Gigabyte motherboard last month, so they're the only manufacturer allowed to get out of the business this year.
about time. (Score:2)
First VIA drops Chipsets, and now Abit drops boards. Couldn't happen to a better MB manufacturer.
Worst board I ever owned was an Abit KT7A. To this day I'm convinced that Abit Golden Sampled the reviews of that board.
My KT7A was blue screen after Kernel Panic after lockup, And half the time, it would corrupt the drive even though it would pass every hard drive, Processor and Memory test known to man. Abit Finally put out a BIOS that removed the suck from it, but it was pretty much EOL when it came out and c
let's hope they go into the ulta mobile laptop biz (Score:2)
they had good support and a good product so let's hope they still have a foot in the market. UMPs might be a good place for them to shine again.
LoB
NF7 (Score:1)
Sad to see this company stop making mobos
I remember my trusty NF7 fondly
Re: (Score:1)
LOL still using one... it's trusty alright!