Please create an account to participate in the Slashdot moderation system

 



Forgot your password?
typodupeerror
×
Earth Printer

New Font Uses Holes To Cut Ink Use 540

An anonymous reader writes "A Dutch company has taken an open source Sans Serif font and added holes to it to try and save on printer ink costs. The Ecofont is claimed to save up to 20 percent of ink costs, but it allegedly took the firm a while to perfect the ratio of the maximum number of holes possible without sacrificing readability."
This discussion has been archived. No new comments can be posted.

New Font Uses Holes To Cut Ink Use

Comments Filter:
  • Practicality? (Score:5, Interesting)

    by Midnight Thunder ( 17205 ) on Wednesday December 17, 2008 @05:41PM (#26151275) Homepage Journal

    Looks interesting, but probably not very practical. Surely simply printing in draft mode and in grey-scale is an easier way? On screen this is probably going to be more headache than its worth.

    • by Jesus_666 ( 702802 ) on Wednesday December 17, 2008 @07:03PM (#26152371)
      You're not getting it. Those are speed holes. They make the font faster.

      I'm waiting for the serif version of that font; there they'll replace the serifs with spoilers. I also think they will add a special Type-R sticker glyph in a Unicode Private Use Area to make it go even faster. Then the only thing that could possibly beat the font would be drift typing - but everyone knows that technique can be handled only by the most extreme Japanese fonts.
    • Woohoo! (Score:5, Funny)

      by EmbeddedJanitor ( 597831 ) on Wednesday December 17, 2008 @07:06PM (#26152403)
      I cal kill 20-25% more trees with one toner cartridge!
    • Re:Practicality? (Score:4, Insightful)

      by pla ( 258480 ) on Wednesday December 17, 2008 @07:31PM (#26152649) Journal
      Looks interesting

      No, looks like complete and utter crap.

      And I say that as someone who encourages people to print in the most severe toner-saving mode their printer has; as someone who duplexes everything, often 4-up per side; someone who considers a 9pt font shamelessly wasteful for anything but a presentation-quality final result.

      I also say it as someone who doesn't get all elitist about fonts (I happen to like Comic Sans, ThankYouVeryMuch), as long as they don't hurt to read.

      And Spranq Eco Sans hurts to read. At large sizes, it looks like a billboard with all the lights out, and at small sizes it looks like someone ran it through the shredder and taped it back together. Just way too visually distracting to even consider.
      • Re: (Score:3, Interesting)

        by DiegoBravo ( 324012 )

        >> someone who considers a 9pt font shamelessly wasteful for anything but a presentation-quality final result.

        Maybe using a bit bigger font size will save in your future ophthalmologist bills.

  • This is pointless (Score:5, Informative)

    by toby ( 759 ) * on Wednesday December 17, 2008 @05:41PM (#26151283) Homepage Journal

    These people don't seem aware that typefaces are usually available in many weights.

    You can save much more than this by simply changing to a lighter weight. [fontshop.com]

    (I am a typographer. But it shouldn't take one to figure this out.)

  • Horrible (Score:5, Insightful)

    by WPIDalamar ( 122110 ) on Wednesday December 17, 2008 @05:42PM (#26151299) Homepage

    At big sizes the holes make it look horrible. At small sizes it's not all that readable as far as fonts go.

    You might as well print at 80% grey instead of black to get the same savings and have it look better.

    • Re:Horrible (Score:5, Insightful)

      by pbhj ( 607776 ) on Wednesday December 17, 2008 @05:54PM (#26151511) Homepage Journal

      From the website:

      View the Ecofont

      In the picture you can see how the Ecofont is created by omitting parts of the letter. At the shown size, this obviously is not very nice, but at a regular font size it is actually very usable.

      It must look pretty horrible at smaller sizes too otherwise I think they might have shown us a sample, no?

      If they'd constructed it out of Sierpinski gasket they would have saved a lot more!

      Nice bit of viral marketing for Spranq methinks.

      • Re: (Score:3, Insightful)

        by Timmmm ( 636430 )

        It's not supposed to look good on screen. It is to save ink when printing.

  • by brian0918 ( 638904 ) <brian0918@gma[ ]com ['il.' in gap]> on Wednesday December 17, 2008 @05:42PM (#26151305)
    "Unfortunately, the font is only available at 120pt or higher, so it will takes twelve times the paper to print out your book report."

    I'm willing to make that sacrifice if it means saving Mother Earth!
  • by nizo ( 81281 ) * on Wednesday December 17, 2008 @05:42PM (#26151327) Homepage Journal

    Just imagine how many electrons could be saved if people used this font in their browser.

  • by booyabazooka ( 833351 ) <ch.martin@gmail.com> on Wednesday December 17, 2008 @05:43PM (#26151329)

    The 'economy mode' on my rather old laser printer basically does this. It just sort of prints letter outlines instead of the full letter. Ecofont's solution seems like... leaky abstraction? The print-saving settings are now embedded into a document rather than determined at print time. Sounds like a terrible idea for a problem that's already been solved.

  • by jollyreaper ( 513215 ) on Wednesday December 17, 2008 @05:51PM (#26151479)

    You know you were thinking it.

  • by rolfwind ( 528248 ) on Wednesday December 17, 2008 @05:52PM (#26151497)

    will it save while I view documents on my ereader?

  • by Bruce Perens ( 3872 ) * <bruce@perens.com> on Wednesday December 17, 2008 @05:54PM (#26151519) Homepage Journal
    Holy Fonts, Batman!
  • Horrible on screen (Score:4, Informative)

    by Fëanáro ( 130986 ) on Wednesday December 17, 2008 @05:55PM (#26151529)

    Looks absolutely horrible on screen, fuzzy and irregular letters at lower font sizes.

    And at bigger sizes the holes themselves start to look jagged.

    does that improve in print?

    • by Galaga88 ( 148206 ) on Wednesday December 17, 2008 @06:09PM (#26151741)

      I printed off a quick test to an HP LaserJet 4100 from Word 2007 in WinXP, and it looks a lot better in print than on screen. 10 & 11 point being where it looks best. You can still see the holes, but they're not as glaringly obvious or jagged as when displayed on screen.

    • Re: (Score:3, Interesting)

      It does print OK, even though the screen display is awful.

      The following isn't a criticism of just this font, but of almost every "modern" font. This just happens to be a particularly notable example.

      It seems to be in vogue these days to ignore the hints needed for limited screen resolution, particularly with antialiasing turned off. Try this experiment: if you're on Windows, turn off ClearType. Compare the horrible screen display of this font with the carefully thought out bit-mapped screen fonts

  • by Anonymous Coward on Wednesday December 17, 2008 @05:57PM (#26151575)

    I prefer to use Inverted Ecofont, in which everything else is removed and only the holes remain. This saves 80% of the ink, and it known to some people as "dot-matrix draft mode".

    This is new font is stupid and not news.

  • by Yvan256 ( 722131 ) on Wednesday December 17, 2008 @06:18PM (#26151863) Homepage Journal

    I would've expected such an idea to come from Switzerland.

  • by stox ( 131684 ) on Wednesday December 17, 2008 @06:29PM (#26151997) Homepage

    The eco-boat.

  • by HTH NE1 ( 675604 ) on Wednesday December 17, 2008 @06:36PM (#26152073)

    I read Slashdot today, oh boy
    Four thousand holes in ecofont sans serif
    And though the holes were very small
    They had to count them all
    Now they know how many holes it takes to fill "the Albert Hall"
    I'd love to turn you on

  • by DTemp ( 1086779 ) on Wednesday December 17, 2008 @06:38PM (#26152101)

    It works via dot gain (http://en.wikipedia.org/wiki/Dot_gain), where ink tends to spread on paper. This happens with both inkjet and offset presses.

    This would be much better implemented as part of the pre-press process of the publisher. The publisher could select all headlines, and apply a "holes" pattern much more specific to their press and their ink levels.

  • by gilgongo ( 57446 ) on Wednesday December 17, 2008 @07:09PM (#26152435) Homepage Journal

    Sigh. As the various outraged typographers here attest, this is a self-promotional stunt and has nothing to do with innovation or even typography. The clue is the first line of TFA:

    "Dutch marketing and communications company Spranq has come up with a novel and free way of slashing printer ink costs by developing a font with holes in it."

    I work for a marcomms agency as well. This is how such agencies get clients: you pull stunts like this to make yourselves look like gurus in some way, so when you go in for pitches you have lots of press clippings (clients don't read them, they just look at where they were published) so you have some kind of differentiation over your rivals. I worked for a place where we made a big fanfare about recruiting an "artist in residence" (and got lots of press) - others in our space have launched "labs" or various kinds, etc. etc.

    There's no substance in any of it. It's all just a marketing con-job and sad to say Slashdot has fallen for it (not that a marcomms agency's clients would be interested in a /. story anyway).

  • Ah, the irony (Score:3, Insightful)

    by condour75 ( 452029 ) on Wednesday December 17, 2008 @07:09PM (#26152439) Homepage

    Clearly this is one of those "let's-get-some-free-press" stories. How much extra ink will be used printing this story on page D-5 of every local newspaper's wacky news section?

  • by Ralph Spoilsport ( 673134 ) on Wednesday December 17, 2008 @07:11PM (#26152461) Journal
    An easier way to save ink AND paper is this: use a sans serif font that has 1/2 the stroke weight and print multipage documents at a smaller size. If the stroke thickness is normally, say, 150 units, make it something like 80. Use a large X height to add to readability. Then print at 10pt instead of 12. Massive savings, and no need to resort to swiss cheese fonts which will look like crapola over 12 pt. Word.

The use of money is all the advantage there is to having money. -- B. Franklin

Working...