Slashdot Log In
Biggest Obstacle of Nuclear Fusion Overcome?
Posted by
Hemos
on Mon May 22, 2006 09:36 AM
from the baby-steps-to-clean-energy dept.
from the baby-steps-to-clean-energy dept.
Yetihehe writes "Nuclear fusion could become a more viable energy solution with the discovery of way to prevent super-hot gases from causing damage within reactors. The potential solution, tested at an experimental reactor in San Diego, US, could make the next generation of fusion reactors more efficient, saving hundreds of millions of euros a year."
This discussion has been archived.
No new comments can be posted.
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
Full
Abbreviated
Hidden
Loading... please wait.
I just want a Mr. Fusion in my car (Score:5, Funny)
Re:I just want a Mr. Fusion in my car (Score:5, Funny)
And, no. You can't have Mr. Fusion in your car. You have to use Budweiser in your Direct Ethanol Fuel Cell - which is fine; if a purpose for Budweiser can be found, it's better than drinking it.
Parent
Re:I just want a Mr. Fusion in my car (Score:4, Funny)
Parent
Re:I just want a Mr. Fusion in my car (Score:5, Funny)
Parent
Re:I just want a Mr. Fusion in my car (Score:5, Informative)
Parent
Fe Fusion (Score:5, Informative)
But it takes more energy to fuse than is released. So iron fusion is pretty much the last fusion reaction to be expected from an end-of-life reactor (of the thermostellar variety)
Parent
Re:I just want a Mr. Fusion in my car (Score:4, Funny)
Parent
Re:I just want a Mr. Fusion in my car (Score:5, Informative)
Actually, you work your way toward iron from either direction. The farther away from iron that you start, the easier it is to get a net gain in energy. Fusion is best with hydrogen and helium, and fission is best with heavy elements like uranium, plutonium, and thorium.
You can do fission with light elements (except for hydrogen-1 of course) and fusion with heavier elements, but you have to put in more energy than you get out. This is why stars die out.
Parent
Re:Garbage -Hydrogen-Energy (Score:5, Insightful)
Parent
Re:I just want a Mr. Fusion in my car (Score:5, Informative)
It is a common perception that early nuclear power proponents boasted of electricity from nuclear reactors becoming "too cheap to meter" in the near future. In fact, while nuclear reactors have become one of the cheapest large-scale options for base-load electricity, it was never the expectation of earlier nuclear engineers that costs would come down low enough to render metering irrelevant.
In fact, the oft-quoted prediction, "too cheap to meter", was made in 1954 by an American bureaucrat, Lewis Strauss, in a speech that very much reflects the public's post-war euphoria over nuclear technology (and technology in general), galvanized by President Eisenhower's vaunted "Atoms for Peace" program launched in December 1953. Strauss' comments predated the first nuclear power plants by three years, and included other optimistic references to wiping out world hunger and extending human life expectancy.
Parent
Re:OT: Trojan cooling tower demolished (Score:4, Insightful)
But yes, nuclear power plants are all one-off designs with no "off the shelf" replacement parts available, unless you count the doorknobs and lightbulbs. Toshiba seems to be testing a novel new approach [adn.com] to distributed nuclear power that makes a lot more sense. It'll do battle with the NIMBY crowd, but you can't please everyone.
One advantage to designs like Toshiba's is that they're small. Yet another issue with Trojan was that if it was cranking out power at it's peak (1100 MW) and it suddenly went offline, the whole Western U.S. felt the hit. Smaller plants cause less havoc when they trip. Furthermore, economic right-sizing for plants seems to be at about 500 MW. Power traders seem to like to manage plants of that size, though I can't say I completely understand why.
In all, I hope to see something of a resurgence in popularity of nuclear power, particularly as we see rising fuel costs for gas fired plants and continued environmental issues around the existence of hydroelectric dams. I don't think we know much at all about the long-term impacts of wind farms.
Parent
Wow! (Score:5, Funny)
The first post related to fusion on /. without declaring that cold fusion is only a few months away!
http://religiousfreaks.com/ [religiousfreaks.com]Re:Wow! (Score:3, Funny)
1:1.2784 (Score:3, Funny)
You misspelled dollars.
Oh, right. That's not how you spell 'dollar' anymore.
1.54350997 (Score:5, Insightful)
You can't be "sarcastic" simultaneously about both a false euro introduction rate of $2.00, and predicting the imminent supremacy of the euro. Especially when getting the intro rate wrong isn't sarcasm.
Parent
hundres of millions of euros? (Score:5, Funny)
Biggest obstacle? (Score:5, Insightful)
Re:Biggest obstacle? (Score:3, Insightful)
My take is that nuclear fusion has had the necessary backing since the 70's. The real problem is that it hasn't shown sufficient returns on that investment to warrant increasing the budget by an order of magnitude or more. Even when fusion generates more energy than it consumes (including fuel acquisition and processing), we still have the problem of making the technology economically viable. I
Re:Biggest obstacle? (Score:4, Insightful)
Well, since they've been trying to develop fusion power since the 50's, that sounds about right. If it was so darn easy to make, we'd have one by now. Fusion power would have all the advantages of fission power, but far fewer disadvantages. Even the environmentalists could like it.
Interesting factoid: Philo Farnsworth, widely recognized as the inventor of electronic television in the 20's was a bigshot in fusion research in the 50's. He helped develop a device called the "fusor", but as we all know, while they did get fusion, they were never able to reach the break-even point.
Parent
Bad Headline (Score:5, Informative)
This is a cool development, but unless I read incorrectly it doesn't solve those problems.
you are wrong (Score:3, Insightful)
Re:you are wrong (Score:4, Insightful)
Nah, that's not such a big obstacle... you can fix that simply by choosing a different name. For example, when everybody was having a snit about "Food Irradiation" [wikipedia.org], they simply relabeled it "cold pasteurization", and presto, problem solved.
As for what to call this technology? I think "hydrogen power plant" would be a fine name. But this all assumes it can be made to actually work... that is the big obstacle.
Parent
The medium shapes the message (Score:3, Insightful)
In fact, far more interesting, is how this article is an example of the effect television has had upon the reporting of news in all mediums.
The medium through which a message passes shapes the message being transmitted.
You can't discuss philosophy using smoke signals; looking at a picture is utterly different to reading a discription of a picture, being in a church for a ceremony is entirely different to watching it on TV in your kitchen.
Television as a medium can only show entertainment.
As such, all messages shown on television are shaped into entertainment.
Unfortunately, where TV *is* our culture (do you remember back when the debate was merely if TV would reflect culture or shape it?) it strongly influences all other mediums as well.
As such, we *cannot* have an article which simply says: a researcher has made a small step forward, solving a possible problem with fusion technology.
No. What we get is "BIGGEST OBSTACLE OVERCOME!!? NUCLEAR FUSION NOW ON THE TABLE?!"
It has to be exciting. It has to grab the reader. It has to be *entertaining*.
Re:The medium shapes the message (Score:5, Insightful)
I'm sure there are plenty of minor breakthroughs in all sorts of fields that get reported responsibly, or not at all. But nobody pays attention to those stories enough to submit them to Slashdot. And if they DO, no doubt Zonk or whoever passes over them as small beans compared to the big stories Slashdot has to tell, like "Linux text editor you've never heard of may fork, says analyst!" The only stuff that makes the grade is the stuff with nice, attention-grabbing headlines.
SO all we see on Slashdot is the sensational stuff, which leads to lots of complaints like yours.
Parent
Re:Solution: ditch your TV (Score:5, Funny)
Parent
Vapourwear (Score:4, Interesting)
From TFA
"I think it's a very interesting solution to a very important problem," says William Dorlund, a plasma physicist at the University of Maryland in College Park, US. But he warns it will be difficult to apply the solution to functional reactors until the theory behind the technique is well understood.
Translation:- Vapourwear
Re:Vapourwear (Score:5, Funny)
Parent
Not quite Mr. Fusion yet (Score:3, Informative)
So it works, but they're not sure it works for the reasons that caused them to create the effect in the first place. Sort of a scientific shrug. Good news, but they're going to figure out why it really works (not just that it works) before they put it into practice.
Kind of frustrating to think that for the cost of the military action in Iraq, we could have built 8 Tokamac reactors. (I know, you could say the same about welfare...it doesn't make the money thrown at Iraq any less irritating)
It'll Be All Done... (Score:4, Funny)
Trust me. The fusion folks can be counted on to be consistent.
Huh... (Score:5, Insightful)
Didn't Dr. Octopus figure this one out already? (Score:5, Funny)
-Ben
crap! (Score:5, Interesting)
Fission also produces neutrons.
Since both reactions produce neutrons they have the same issues - namely dealing with radioactive wastes.
Fisson is easy to create. A team of boy scouts can do it in their own back yard. Fusion is very difficult.
Fission can be totally safe. It can also be very dangerous. It depends on the reactor design but the issue is that the technology is already on the shelf. IE. We can do it now and we have been able to do it for 50 years.
Now the issue is that with the USA designed high pressure reactors, they only use about 2/10 of 1% of the uranium that is mined. What this means is that with a better design we can get about 475 times the milage from our uranium.
There is so much energy available to us that it is almost beyond our imagination. Consider that there are about 114 reactors in the USA which have been running say about 50 years. 50x475 = 23,750 years. There has literally already been enough uranium mined for almost 24,000 years for a well designed reactor like the IRF (Integral fast reactor - look it up in the wikipedia). If we wish to produce 100% of our energy from uranium we have enough uranium mined already for over 2,000 years. Of course the best solution is to use this energy to free up hydrogen which we can combine with carbon to produce synthetic oil (syncrude!). We need about 75 GWe reactors right now here in Alberta. We have a terrible hydrogen shortage. The price of gasoline at the pumps is a symptom of this problem.
Yet - we keep reading stories about the holly grail - Nuclear Fusion.
Yes, some day will will build a fusion reactor. The research is a good idea. But the idea that it will be problem free is a false idea. The biggest obstacle is not wear and tear due to plasma - the biggest obstacle is neutrons flying around and these are difficult to control. In fact - the best solution might be to pack a bunch of thorium around the plasma and use the neutrons to transmute it into U233 which we can cart off to a fission reactor. As an alternative we can pack U238 around the plasma and cart of the Pu239. These are viable fuel cycles - unfortunately at present they are not politically correct.
Re:crap! (Score:4, Informative)
Dude isn't exaggerating [boyscouttrail.com]
Parent
Re:crap! (Score:5, Interesting)
Fusion produces orders of magnitude more neutrons.
In a fission plant, excess neutrons are bad. You want the pile to be barely critical, a stable, but not runaway, chain reaction. So you actually don't have a lot of neutrons flying out of the pile. You moderate the ones you do produce, and use them to fission additional fuel atoms.
But in a D-T fusion scheme, the bulk of the liberated energy is produced in the form of a very energetic 14 megaelectron-volt neutron. And this neutron doesn't participate in additional reactions, DT fusion isn't a chain-reaction process like fission is. The neutron will leave the plasma. Heck, ideally, that's how you get energy out of the reactor, by trapping that neutron in a surrounding blanket, causing that blanket to heat up so you can use that heat to boil water. Every single D-T fusion generates one of these neutrons, so the neutron flux will be many many times that of a fission plant.
But that's not an issue because of "radioactive waste." The wastes we're concerned about from fission aren't neutrons, they're from fission fragments and decay daughters. Some of those might emit neutrons themselves, but really, that's not the primary concern; neutron-induced radioactivity is actually pretty short-lived.
The reasons neutrons are a concern in a fusion plant is that continuous high-energy neutron bombardment does very bad things to all known materials that you might want to build a reactor vessel out of. When a neutron strikes an atom, it displaces it within the crystal lattice. If that happens once, no big deal, but in a commercial fusion reactor, the reactor vessel will experience 300 to 500 displacements per atom over the lifetime of the device. That means that, right now, we don't even know what to build one of these things out of. Austinitic steels start to swell, crack, and degrade after only about 30dpa, and the very best candidate materials we know of can only handle about 150; those might be acceptable, if the cost of changing the inner wall out isn't too high, but we just don't know.
And ITER won't even begin to explore those issues. ITER's flux will only generate 3 displacements per atom.
Fusion is very very hard. My money says that we'll never use commercial fusion power.
Parent
Reality check on bad science. (Score:5, Informative)
Disclaimer: I am a fusion scientist.
The result mentioned in the article has been around for about a year in the fusion community. It is very good work, and opens up further areas of study. However, it is specific to a single Tokamak, and so far has not yet been repeated. Furthermore, the result has not yet been fully understood. (This is linked to it not being repeated.)
This may be sensational news, but it shouldn't be, due to claiming to solve a problem, which so far they haven't fully done. Don't take anything away from the guys who did this. Like I said, excellent work. But until the result is confirmed and understood it should stay out of mainstream media.
There are many big problems for fusion, like plasma instabilites [wikipedia.org], neo-classical tearing modes, ELMs (as mentioned), ohmic heating in transformer coils. The list goes on, it's a complex subject. Thankfully with all countries signed up, and more than enough money for ITER's budget (even if America pulls out again), the politics can be minimised and the physics can continue.
Re:hmmm.. (Score:5, Funny)
Parent
Re:hmmm.. (Score:3, Insightful)
FTFA, "...the International Tokamak Experimental Reactor (ITER) - which is to be built in Cadarache, France, from 2008 at cost of 10 billion Euros." The experiment was completed in the US. The reactor's use will be in France and probably service, oh, I don't know...Europeans.
Re:hmmm.. (Score:5, Informative)
TFA used euros because it was written from a European perspective. It's generally customary to quote price in the local currency of the audience you are writing for.
Parent
Re:hmmm.. (Score:3, Insightful)
Daniel
Re:summary is wrong (Score:5, Informative)
Thus saving millions of dollarpounds each year.
Parent
Re:summary is wrong (Score:3, Funny)
Re:biggest obstacle will be environmentalist. (Score:3, Funny)
Re:biggest obstacle will be environmentalist. (Score:5, Interesting)
Fission, on the other hand.. is problematic. It might be the only viable alternative at the moment (well actually I'm just saying that to not get flamed) but nobody can say it doesn't have its share of problems. Waste being the biggest, safety (yeah yeah I know, pebble reactors, yada yada
Parent
Natural Organic Save Our Animals Power (Score:5, Funny)
Parent
Re:Tested in San Diego? (Score:5, Insightful)
I'm not a scientist either, but I have read a little on the subject....And from what I understand, the reaction would peter out and die very quickly - very little fuel is used in comparison to a fisson reactor, and the reaction itself requires very precise control to happen at all.
Comments like yours are part of the reason there's so much nonsensical backlash against this sort of technology - "I have no idea what i'm talking about, but it must be bad just because! Nuclear bombs are evil, so this must be the same!".
Couldn't they have done this in some place a little less populated? Like North Dakota or in the area near Area 51?
I would have one of these reactors in my backyard (well, if I wasn't in an apartment right now, anyway) with no reservation whatsoever.
Parent
Seven links (Score:4, Informative)
http://en.wikipedia.org/wiki/Aneutronic_fusion [wikipedia.org]
http://en.wikipedia.org/wiki/Nuclear_fusion [wikipedia.org]
http://en.wikipedia.org/wiki/Neutron_flux [wikipedia.org]
http://en.wikipedia.org/wiki/Neutron_radiation [wikipedia.org]
http://en.wikipedia.org/wiki/Proton-proton_chain [wikipedia.org]
http://en.wikipedia.org/wiki/CNO_cycle [wikipedia.org]
The above links, read in order, should step through nicely outlining the fusion process, and some of the major challanges that are to be overcome in making it a viable power source for use on Earth.
Today, I will have understanding of fusion. Tommorrow I will understand Subscriber trunk dialing, and then, computers. Once I have an understanding of computers, I will rule the world!
My apologies, Terry.
Parent
Re:Err... (Score:5, Funny)
Unfortunately, the big enough size is about 1.424025 × 10^29 kg. So I'd suggest finding out a more efficient solution and not depending just on economics of scale.
Parent
Re:And still people will complain... (Score:5, Funny)
They should vanish in a brilliant flash of green ...
Parent
Re:And still people will complain... (Score:4, Insightful)
Parent
Re:And still people will complain... (Score:4, Informative)
This is an important point. I remember reading some time ago that there was interest in using Vanadium alloys for fusion reactors. I used to wonder why this was. I am a Materials Scientist, and Vanadium is usually used as an alloying element, but not as the basis for an alloy. I think I finally figured it out. The most common isotope of Vanadium is V51. If V51 absorbs a Neutron, it quickly beta-decays into Cr52. From there, Cr52, Cr53, and Cr54 are all stable. Further neutron absorption will eventually convert atoms to Mn, Fe, and eventually get to Co59. All of the beta-decays involved are relatively short lived, IIRC. From a materials science prospective, V, Cr, Mn, and Fe are all Body Centered Cubic (bcc), whereas Co is hexagonal close packed (hcp). If you produce too much Co, you could start getting phase transformations in the alloy, which would probably degrade the strength. Fortunately, if you start with V51, then it can absorb 8 neutrons before it gets to an element that has a high probablity of degrading the alloy strength.
Disclaimer: This is just speculation on my part, but it makes a lot of sense. If anybody knows more than I do, I'd love to hear it. I suspect maybe there are also concerns about the magnetic behavior of Fe and Co in the presence of the high magnetic fields used for fusion.
Parent